Home Programmer's Reference Manuals for Elecraft Products

Programmer's Reference Manuals for Elecraft Products

Use Adobe Reader to view these PDF files. Get Adobe Acrobat Reader here.

Note: Some of these manuals make reference to products or parts that are no longer available (at Elecraft). Visit our Retired Products page to view the list.

Product Manual Revision Download Size
K4 Programmer's Reference

K4 Programmer's Reference

Note: This release of the programmer's reference includes updated SW command codes that pertain to release R20 or later of the K4 Software.

Rev C15
252 Kb
K4 Command Index K4 Remote-Control Command Index (From John, W3SA)  Rev. 3 11/29/23 41 Kb
K3S K3S, K3, KX3 & KX2 Programmer's Reference Rev G5 (02/20/2019) 573Kb
KH1 KH1 Programmer's Reference Rev A2 (12/14/2023) 58 Kb
P3 P3 Programmer's Reference Rev A7 (04/22/2016) 25 Kb
KPA500 KPA500 Programmer's Reference Rev A2 (7/7/11) 160 Kb
KPA1500  KPA1500 Programming Reference Rev 3  (11/9/23) 598 KB
KXPA100 KXPA100 Command Reference Rev. 1.18 (11/21/2013) 0.6 Mb
KAT500 Elecraft KAT500 Automatic Antenna Tuner Serial Command Reference Ver. 02.00  (8/18/2021) 507Kb
PX3  PX3 Programmer's Reference Rev A6 (2/13/2017) 861 Kb
K2 / KIO2 Complete programmer's command reference for RS-232 computer control of the K2 with the KIO2 or KPA100 .  REV E (2/3/2004) 193 KB
*Document contains a link that will lead you to a website or contact information hosted by another party. Elecraft, Inc. takes no responsibility for the validity of the content on the website.