AX3 30-10 METER WHIP ANTENNA
1
/
of
5
Our new AX3 is a six-band, POTA-ready whip antenna/tripod system designed for rapid-deployment, table-top operation at parks, campgrounds, or in your backyard. With the high bands on fire, the AX3 lets you work the world, at up to 30 W -- instant adventure, wherever you go! Operate on any band from 30 through 10 meters, selecting bands with our unique, high-reliability 4-position contact block. There's no need for taps or long jumper wires, since the AX3 works with your rig's built-in ATU*. There are also two counterpoise attachment points, for maximum versatility: a binding post as well as a mini-banana jack.
The AX3 has unique features that simplify mounting as well as transport. It includes its own ultra-compact tripod, as well as a 1/4-20 threaded base mount for use with standard camera tripods and hiking poles. The telescoping whip, base, and tripod legs are only 6" long, so they'll fit in our smallest radio go-bags. The BNC jack comes out at a 90 degree angle -- no need for right-angle adapters or clamps. Just add a short coax cable to the rig (e.g. our 3 foot [90 cm] model AXC3). As with the AX1 and AX2, the AX3's whip extends to 45" (51" total, counting the base). This compact length has been field-proven over countless field activations.
* An antenna matching device (such as an ATU) is required with the AX3 for fine impedance matching. Resonances with the 10, 14, and 18 MHz contact block settings are close to the 30, 20, and 17 meter ham bands. The fourth setting ("> 21" MHz) is resonant at ~24 MHz, and is intended for use on 15, 12, and 10 meters. All Elecraft transceivers include optional built-in ATUs that are compatible with the AX3.
View full details
The AX3 has unique features that simplify mounting as well as transport. It includes its own ultra-compact tripod, as well as a 1/4-20 threaded base mount for use with standard camera tripods and hiking poles. The telescoping whip, base, and tripod legs are only 6" long, so they'll fit in our smallest radio go-bags. The BNC jack comes out at a 90 degree angle -- no need for right-angle adapters or clamps. Just add a short coax cable to the rig (e.g. our 3 foot [90 cm] model AXC3). As with the AX1 and AX2, the AX3's whip extends to 45" (51" total, counting the base). This compact length has been field-proven over countless field activations.
* An antenna matching device (such as an ATU) is required with the AX3 for fine impedance matching. Resonances with the 10, 14, and 18 MHz contact block settings are close to the 30, 20, and 17 meter ham bands. The fourth setting ("> 21" MHz) is resonant at ~24 MHz, and is intended for use on 15, 12, and 10 meters. All Elecraft transceivers include optional built-in ATUs that are compatible with the AX3.
- AX3 Pack
- Specs
- Accessories
- Manuals
- Price List/Order
AX3 Package
|
| Package Savings! |
Specs
|
Resonant Frequencies |
AX3: ~10 MHz, ~14 MHz, ~18 MHz, ~24 MHz (for 21-29 MHz) AXE1: ~7 MHz (using AX3’s 14 MHz setting) Resonant frequencies approximate. |
| Supplied Radial Wire | 13 feet (3.3 m) long. AXE1: 33 feet (10 m). Wire has pre-installed lug for attachment to the AX3’s ground screw. |
|
Max. Power |
30 Watts, 50 % duty cycle. If RFI symptoms are observed, reduce power or use a balun. |
|
Construction |
Corrosion-resistant whip and hardware; nylon housing; high-Q inductors wound with high-temp enamel wire. |
|
Dimensions |
Whip: 6” (15 cm) collapsed, 45” (115 cm) extended. Base and plug-in tripod legs: 6” (15 cm) long. |
| Weight | AX3: 5.0 oz. (140 g), less coax. AXE1: 2.0 oz. (55 g). |
| Included with the AX3 | AXW1 Whip, Ground Wire |
Accessories
- AXE1 40 Meter Antenna Extender
- AXC3 COAX Cable
- KX2GNDPLUG Mini Banana Plug
- AXW1 Replacement Telescoping Whip
- E770064 13' Ground Wire with lug (extra wire - one incl. w/AX1)
- ES10 Carrying Bag
- AX3TL Set of three replacement Tripod Legs
- AX3BK AX3 Band Knob Replacement
Compatible Products
Ultra-Compact Home/Portable/Mobile Station
The revolutionary Elecraft KX3 puts the world in the palm of your hand! D...
An 80-10 m SSB/CW/Data station that fits in your pocket!
Note: Paddle in picture is not included. May be purchased ...
The ES10, made specifically for the AX3 is a water-proof nylon draw-string bag with a cord lock to keep your equipme...
