The software provided for download on this page is provided as a free service to our customers and is provided as-is without warranty. They are considered “unsupported, contributed utilities.” That is, maintenance and support for the software apps is not guaranteed and may not be available on all popular operating systems. Elecraft may elect to update them but makes no commitment to do so. All software on this page is free for use by Elecraft operators.

This software is helpful in using your K3S, K3, KPA1500, KPA500 or KAT500 in a Remote Setup. This includes a RemoteRig or PC based remote.

KPA1500 Remote Program (v1.34, 7/12/24)

*Requires KPA1500 FW 1.64 or newer 

 Allows for Remote for monitoring and controlling the KPA1500 amplifier.
Features: Dual server and client mode: Can be configured to operate back-to-back in a client and server.

Also can directly connect to the KPA1500 USB, or via IP addr on your local network.

• Using the USB port or Ethernet connection on the KPA1500, you can use this app to remotely control the amp from a computer in the shack or from across the internet.
• Multiple Operating Views: You can choose the full instrumentation view or a Mini-Vertical or Mini-Horizontal view.

Download

KAT500 Remote Program (v1.16)

*Requires KAT500 FW 1.41 or newer 

Allows for hosting a KAT500 Remote for monitoring and controlling the amplifier. This program has a built in server and client.

KAT500-Remote User's Guide
Download

(Requires .NET 4.0, Windows XP or newer only)

KPA500 Remote Program (v1.17)

*Requires KPA500 FW 1.33 or newer 

Allows for hosting a KPA500 Remote for monitoring and controlling the amplifier. This program has a built in server and client.

KPA500-Remote User's Guide
Download

(Requires .NET 4.0, Windows XP or newer only)