pickup icon

March Specials - Free Shipping on all Amps!

  • Overview
  • Specs
  • Options/Accessories
  • Manuals
  • Refurbished Warranty
  • Price/Add To Cart




KX2 Core Assembly
KXAT2-F Internal Automatic Antenna Tuners


What's in the Box
Refurbished KX2-F
Power Cable



Only 13 oz. (0.3 kg) – ideal for portable and hand-held operation 
• Internal 2.6 Ah, 11 V Li-ion battery option 
• Internal wide-range ATU option 
• Current drain as low as 135 mA 
• Built-in microphone and speaker 
• Advanced DSP provides dual watch, noise reduction, noise blanking, autonotch, stereo audio 
• Versatile software-defined radio (SDR) architecture 
• Operates in data modes (PSK31/RTTY) with or without a PC


Standard Features
  • 80-10 meter ham bands; general coverage receive from 3-32.0MHz (also covers 0.5 to 3 MHz with reduced sensitivity)
  • All modes: SSB, CW, and Data (four sub-modes)
  • Ultra-compact size: 2.8”H x 5.8”W x 1.5”D; 13 oz (less options); low-profile knobs and feet for minimum height
  • Rear tilt foot provides 3-point mount for rugged terrain
  • Custom high-contrast LCD with alphanumeric text display
  • Current drain as low as 135 mA in receive mode
  • High-performance 32-bit floating-point DSP
  • Built-in PSK/TTY decode/encode allows data mode operation without a PC; transmit in data modes using CW keyer paddle
  • Synthesizer has 1-Hz tuning resolution
  • Integrated numeric keypad for direct frequency entry


  • Software-defined-radio (SDR) architecture for versatility
  • Switchable preamp and attenuator
  • 8-band RX EQ
  • Simultaneous dual receive over up to +/- 23 kHz for split-DX operation
  • Built-in speaker; stereo jack for headphones or powered speakers
  • Easy-to-use Passband Tuning (PBT) for shift/width/hicut/locut; roofing filters automatically track DSP filter settings
  • Auto-notch removes interfering carriers; adjustable noise reduction and noise blanking; stereo audio effect
  • Center-tuning indicator for CW and data modes; auto-spot


  • Up to 10 W on 80-15 m, 8 W on 12 and 10 m (typ.)
  • 100 W with KXPA100 amplifier
  • Rugged, SWR- and temperature-protected final amplifier stage
  • Use with built-in mic or MH3 (with UP/DN VFO functions)
  • CW keyer with 8-50 WPM range; fast, full-break-in keying
  • Built-in digital voice recorder (DVR) with 2 message memories
  • Three CW/DATA message memories
  • Fast, silent, PIN-diode T-R switching – no noisy relays
  • DSP speech processing for excellent “punch”
  • 8-band TX EQ tailors passband to your voice and microphone

Additional Features

  • General-purpose and per-band memories store VFOs, modes, etc.
  • Computer control via supplied USB or RS232 cable
  • Free firmware updates via provided application software
  • Programmable switch (PFn) for access to an often-used menu entry
  • Full remote-control command set works with popular computer software applications
  • Selectable switch-press tones or full Morse code-based interface
  • Tutorial-style manual ideal for new hams





New shipping regulations for Lithium Ion Batteries

Until further notice, we are currently restricted to shipping up to 3 KXBT2 batteries in a single shipment, with one of the three batteries inside a KX2 - this is for both US and international shipments.

We cannot ship Lithium Ion Batteries to the following countries: Australia, Japan, Spain and Thailand.

Battery orders alone can only be shipped UPS Ground - US only.
We apologize for the inconvenience.






Elecraft Certified Refurbished Limited Warranty

Elecraft’s Certified Refurbished equipment are maintained and thoroughly tested by Elecraft Technicians. 

Who is covered?

This Warranty extends only to the first consumer purchaser, and is not transferable.

What is covered and for how long?

Elecraft Certified Refurbished Limited Warranty is One Year from the date of purchase for the following refurbished items: 

  • Transceivers
  • Amplifiers
  • Tuners
  • Panadapters
  • Remote Systems

Elecraft Certified Refurbished Limited Warranty for products not listed above is 90 Days from the date of purchase.  This includes but is not limited to:

  • Test Equipment
  • Power Supplies
  • Accessories
  • Cables

This Warranty is conditioned upon proper use of the product and covers manufacturing defects in materials and workmanship encountered in normal, reasonable use of the product during the warranty period. 

What is not covered?

  • Normal wear and tear
  • If the product has been mistreated or mishandled
  • If the product has been improperly installed or configured
  • If the product has been modified from its original condition
  • If the product has been subject to an accident
  • If the product has been subject to lightning, power surges, incorrect electrical voltage, or any electrical stress
  • If the product has been subject to acts of nature
  • If a battery has been charged by a battery charger not specified or approved by Elecraft for charging the battery
  • If any of the seals on an Elecraft battery are broken or show evidence of tampering; or the battery has been used in equipment other than the Elecraft device for which it is specified.

This warranty only covers Certified Refurbished Elecraft product(s).  

What are Elecraft’s obligations?

During the applicable warranty period, provided the Product is returned in accordance with the terms of this Limited Warranty, Elecraft will repair or replace the Product, at Elecraft’s sole option, without charge. Elecraft may, at Elecraft’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product, or may replace the Product with a rebuilt, reconditioned or new Product.

All replaced Products, parts, components, boards and equipment shall become the property of Elecraft except to any extent expressly allowed by applicable law, transfer or assignment of this Limited Warranty is prohibited.

While equipment is under warranty, owner pays inbound shipping to Elecraft for warranty repair. Elecraft will pay return shipping by UPS ground service or equivalent to addresses within the continental U.S.  Alaska, Hawaii and outside U.S. return shipping cost is paid by owner. See below for instructions on contacting Elecraft for product repairs.  Shipping cost for equipment repair not under warranty is the responsibility of the owner. 

IMPORTANT Instructions

You must contact Elecraft, before mailing us your product to obtain authorization for the return, shipping address and current information on repair fees and turn-around times. You may contact us by email at support@elecraft.com. Shipping instructions will be included with Repair Authorization. We have more than one repair location, so please ship to the address included with the repair authorization.  Packages shipped without authorization will incur an additional shipping charge for reshipment to the correct repair location.

Our basic repair / alignment charge is $99.00, plus return shipping. If you wish, you may set a limit for the repair charges, and we will contact you when we have reached that point before proceeding.  If we determine the problem is wholly due to a defect in components supplied by Elecraft (within the warranty period), we will not charge you for the repair. Please read the warranty information above for additional details on what is covered.

Contact Customer Support for the Repair Authorization before shipping your equipment for repair.  You may email Customer Support at support@elecraft.com to request an authorization form.