Check Out Our Autumn Specials!

Elecraft Contributed Software

 Contributed Utilities and Software

The software provided for download on this page is provided as a free service to our customers and is provided as-is without warranty. They are considered “unsupported, contributed utilities.” That is, maintenance and support for the software apps is not guaranteed and may not be available on all popular operating systems. Elecraft may elect to update them but makes no commitment to do so. All software on this page is free for use by Elecraft operators.

Elecraft Frequency Memory Editor Software


The Elecraft Frequency Memory Editor helps you maintain frequency memories using a spreadsheet format. It supports the KX2, KX3, K3S and K3 radio systems.

Memories can be recalled using K3, K3S, and KX3’s M>V switch or the memory editor’s “QSY” buttons.

Once memories are stored in your KX2, K3S, and KX3, you can disconnect the KX2, K3S, and KX3 from the PC. You can even maintain sets of memories in PC files and share them with other KX2, K3S, and KX3 users.

The program can be used by K3, K3S, KX2 and KX3 owners, and the saved files can be shared without regard to the radio type. The KX3 has a broader range of acceptable 2 meter frequencies than does the K3/K3S

Elecraft Frequency Memory Editor Software Install
v1.5.7.20

Supports Windows platform only (Win XP SP3 and later)
Please see the Help pull down menu for instructions and examples

KAT500 Remote Program (v1.15)

*Requires KAT500 FW 1.41 or newer 

KAT500 Remobe by Elecraft

Allows for hosting a KAT500 Remote for monitoring and controlling the amplifier. This program has a built in server and client.

KAT500-Remote User's Guide
Download

(Requires .NET 4.0, Windows XP or newer only)

KPA500 Remote Program (v1.15)

*Requires KPA500 FW 1.33 or newer 

 KPA500 Remote (V1.15)

Allows for hosting a KPA500 Remote for monitoring and controlling the amplifier. This program has a built in server and client.

KPA500-Remote User's Guide
Download

(Requires .NET 4.0, Windows XP or newer only) 


K2 Remote and K2 Voice Program Downloads and Instructions

K2 Voice provides complete K2 voice feedback (frequency, mode etc.) via your PC.

Installation

To save these files, rather than running them directly from the web site, you may need to right click on their links and then chose the "Save Link As.

Release and Supportability

These programs are supported only on Windows PC’s. Further, they are unsupported, contributed utilities. They have been tested only on the Windows versions listed. They are offered as examples only. Please see the list of 3rd party software that is available for the KX2, KX3 and K3S on our Community web page.



 K3 Voice

Elecraft K3 Voice


K2 Voice

K2 Voice V1.05 beta

 K2 Voice Main Screen

 

K3 Voice and K2 Voice are voice feedback programs for the K3 and K2. They run under Windows 95,98, 2000 & ME. (And vista for K3 Voice). They are provided free, without warranty or ongoing support for your use. K2s will require the KIO2 option.
Our goal is to make the K3 and K2 useful for hams who are unable to see the normal controls and displays. It will report most common operations on using the soundcard in your PC. Both programs report the frequency, mode, filter selections, split, VFO a/b etc.

The Programs operate in one of three modes:

  • Fully automatic: All button presses and frequency changes made on the K2 are automatically reported within one second of completion. VFO frequency changes are reported after tuning has stopped for one second.
  • Semi Automatic: Same as above except the VFO is not automatically reported. Press a key to get the current VFO frequency.
  • Manual: Press a key for each function to be reported. for example, press ALT- F to get the current frequency, ALT-M to get the current mode etc.

 K2 Remote

Elecraft Remote Radio (K2) v0.7

K2 Remote Main Screen

K2 Remote is a basic demonstration RS-232 control program designed for the K2 that runs under Windows (95,98, 2000, XP & ME). It requires the K2 KIO2 RS-232 control option to operate and is provided free without warranty for your use with our KIO2 option.

For more extensive remote control applications please see the list of programs in the Community section. There’s a link at the top of the page you are on now.