{"title":"Quick Order","description":"","products":[{"product_id":"k-pod-control-panel-for-the-k3s-k3","title":"K-Pod_K-Pod Control Panel for the K4\/K4\/0\/K3S\/K3","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA Compact Accessory Panel for Contesting, DXing, and Customized Station Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe K-Pod is an ideal companion to your Elecraft K4, K4\/0, K3 or K3S Transceiver, maximizing both convenience and operating efficiency. At only 3.5 x 3 x 1 inches (9 x7.5 x 2.5 cm), it can be placed anywhere the action is, typically next to a computer keyboard. It’s versatile enough to integrate transceiver and station control functions, putting you in command as never before.\u003cbr\u003e\u003cbr\u003eA utility jack beneath the K4, K3 and K3S radio’s front panel acts as the K-Pod’s data interface. The unit can be powered from the radio’s rear 12-V accessory output, the pod’s own USB port, or any 8-15 V, 50-mA DC power source.*\u003cbr\u003e\u003cbr\u003e*The K-Pod can also be powered directly through its data cable. This may require a minor modification to your radio’s front panel module. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWeighted, Soft-Touch Knob\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAssignable to VFO A, VFO B, or RIT\/XIT Offset, the K-Pod has a heavy, free-spinning knob with a great feel that won’t wear you down during extended operation. It’s attached to a 400-count ball-bearing optical encoder, providing fine-grain frequency control. Friction can be adjusted to individual preference.\u003cbr\u003e\u003cbr\u003eYou can instantly map the knob to VFO A, VFO B, or RIT\/XIT offset using the K-Pod’s rocker switch. Three of the unit’s user-definable LEDs indicate rocker switch position, by default. Switch events can also be audibly reported by the K-Pod’s built-in audio transducer.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 Programmable Switches\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eControl existing radio functions or create your own functions. Each of the K-Pod’s tactile-feedback switches (F1-F8) has a programmable tap and hold functions. For example, they can be used to duplicate controls on the radio’s front panel or as hot keys into often-used menu entries.\u003cbr\u003e\u003cbr\u003eBut the possibilities go well beyond this. When a K-Pod switch is pressed, it can execute a series of one or more commands stored in the transceiver itself. A command sequence can engage complex VFO splits or special receiver settings, play transmit messages, clear the RIT offset, select a receive antenna, toggle diversity reception, etc. The K-Pod manual includes step-by-step instructions for switch programming, with many examples.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUSB Port and 3 General-Purpose Outputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA USB port is provided on the K-Pod for firmware updates and future station control uses. This port can also be used to configure the K-Pod’s switches to perform other special functions, such as activating the unit’s 3 general-purpose outputs. These outputs are open-drain, acting as contact closures to control relays, etc., in other station gear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eAccessories\u003c\/h2\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAccessories\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraft.com\/products\/k-pod-aux-cable\" target=\"_blank\"\u003eK•Pod AUX Cable\u003c\/a\u003e - Connects the 3 Solid State switches to your own designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eParts \u0026amp; Mod Kits for the K-POD\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraft.com\/pages\/parts-mod-kits\" title=\"Parts and Mod Kits\" rel=\"noopener\" target=\"_blank\"\u003eVisit the QUICK ORDER Page, choose from the drop-down\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eReviews\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/12918\"\u003eeHam.net Reviews\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eManuals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/k-pod-remote-control-module-manuals\" title=\"K-POD Manuals, Schematics and Programmer's Reference\"\u003eK-POD Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32548331595,"sku":"K-Pod","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/K-Pod_overview_900.jpg?v=1519339932"},{"product_id":"kpca-f_power-cable","title":"KPCA-F_ KPCA-F Power Cable","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe KPCA-F power cable is shipped with the purchase of a K3S.  It can also be ordered under this product number as an extra cable.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe KPCA-F cable has Anderson Power Pole connectors installed on one end of this 12 gauge cable.  The other ends will have ring terminals sized to fit over the popular bolts and binding posts found on popular power supplies.\u003c\/p\u003e\n\u003cp\u003eIt is recommended for operators who wish to quickly switch their radios in multiple stations.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 5 ft.\u003c\/li\u003e\n\u003cli\u003eConnectors:  30 amp Anderson Power Pole connectors and #12 ring terminals\u003c\/li\u003e\n\u003cli\u003eWire size:  12 gauge, stranded for flexibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32694281611,"sku":"KPCA-F","price":29.95,"currency_code":"USD","in_stock":true}]},{"product_id":"kpa500-k-500w-linear-amplifier-kit","title":"KPA500-K_KPA500 500w Amplifier, Kit  -  NOTE: Select 1 PWR Cable Below","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKPA500 Compact 160-6 M Solid State Amplifier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable as a Factory Assembled or Modular No-Soldering Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdd more punch to your signal with Elecraft's \u003c\/span\u003e\u003cstrong\u003eKPA500\/KAT500 PowerCombo\u003c\/strong\u003e!  Learn more \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" href=\"https:\/\/elecraft.com\/products\/75-discount-on-a-kpa500-kat500-power-combo\" title=\"KPA500 \u0026amp; KAT500 Power Combo\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/PowerCombo.jpg?v=1738973969\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e500+ Watts in a compact package \u003c\/strong\u003e\u003cbr\u003eThe 500-watt solid-state amp that integrates so well with your station (most HF Transceivers), you’ll think it's reading your mind.  \u003c\/p\u003e\n\u003cp\u003eThe KPA500 features 160-6M coverage, instant RF-based band switching with any radio, alphanumeric status display, bright LED bar graphs, and a rugged, internal linear supply. The amp’s manual band switches may be used to directly change bands on the K3 and K4 Transceivers.  Additionally, the K3 and K4 can automatically select per-band amplifier drive levels when the amp is placed into operation mode, so you’ll rarely need to adjust the power output.\u003c\/p\u003e\n\u003cp\u003eBut the KPA500 is not just limited to use with  K3s and K4s – it is fully compatible with most radios. (Only amplifier keying (PTT) and RF are required for operation, including instant RF frequency sensing, fully automatic band switching.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKPA500 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e500W, Compact, Solid State FET amplifier for 160-6 m\u003c\/li\u003e\n\u003cli\u003eWorks and auto band selects with any radio that provides Key-Out and RF signals.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e26 lbs, 12 kg\u003c\/li\u003e\n\u003cli\u003eInternal low noise linear power supply: 100-120, 200-240 VAC, 50\/60 Hz operation\u003c\/li\u003e\n\u003cli\u003eInstant-on operation\u003c\/li\u003e\n\u003cli\u003eRugged, conservative design with smart soft and hard fault detection\u003c\/li\u003e\n\u003cli\u003eIntelligently reduces power by 2.5 dB temporarily when presented with input overdrive or a high SWR, allowing you to quickly reduce your drive to compensate without dropping the amplifier off-line. The amp automatically recovers to full power once the soft fault condition is corrected.\u003c\/li\u003e\n\u003cli\u003eExcessive overdrive or SWR events instantly place the amp safely into protective stand-by\u003c\/li\u003e\n\u003cli\u003eWorks with any radio that supplies PTT to Ground\u003c\/li\u003e\n\u003cli\u003eUltra high speed QSK. Silent, diode switched T\/R\u003c\/li\u003e\n\u003cli\u003eSuper fast RF sensing band selection. Only PTT and RF are required for fully automatic band changing operation.\u003c\/li\u003e\n\u003cli\u003eCan receive band data information from most radios that supply it\u003c\/li\u003e\n\u003cli\u003eFully remote controllable\u003c\/li\u003e\n\u003cli\u003eSix speed temperature sensing fan\u003c\/li\u003e\n\u003cli\u003eAdvanced integration with the K3 and K4 Transceivers using the optional KPAK3AUX cable\u003c\/li\u003e\n\u003cli\u003eKPA500 band buttons drive the K3 and the K4 Transceiver band and drive level\u003c\/li\u003e\n\u003cli\u003eBand data is sent from K3 and K4 Transceivers to KPA500 before TX\u003c\/li\u003e\n\u003cli\u003ePTT included in cable, external PTT cable not required\u003c\/li\u003e\n\u003cli\u003eThe K3 and K4 Transceivers sense the KPA500 operate\/standby state and adjust drive power between two memorized levels on each band.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eK3 and K4 Transceivers can also provide two different output power levels for when the KPA500 is in Operate or in Stand-By\/Off mode.\u003c\/li\u003e\n\u003cli\u003eAvailable as Factory Assembled, or as a Modular, No-Soldering Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ccenter\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GzbnzHEkHf4\"\u003e\u003c\/iframe\u003e\u003c\/center\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCables\u003cspan\u003e for Other Radios\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eCables for Other Radio Brands\/Models\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff9900;\"\u003eElecraft\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCable #\u003c\/th\u003e\n\u003cth\u003eTransceiver Model\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eE100416 \u003c\/strong\u003e (Included w\/ Amp)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003ePhono Cable works with most radio models.  Please Select additional cable(s) below based on desired operating mode.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eStandard Mode – Keying.   Phono Keying Cable included with Amp. \u003c\/span\u003e\u003c\/p\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e Amp\/ATU selects band and freq. by using its internal frequency counter to measure TX freq. in this mode. Works with all radios with a keying output phono jack.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cstrong\u003eKPAK3AUXSET\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eK3, K3S\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e\u003cspan\u003eEnhanced Mode. Aux Cable set for KPA500 AND second E850463 aux cable for KAT500. AUX Cable Set incl: 15-Pin to 15-Pin DE-15 + Key Line Interrupter adapter.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eCables for non-Elecraft Transceivers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3 style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff9900;\"\u003eYaesu\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCable #\u003c\/th\u003e\n\u003cth\u003eYaesu Model\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\n\u003cstrong\u003eE100416 \u003c\/strong\u003e(Included w\/ Amp)\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003ePhono Cable works with most radio models.  Please Select additional cable(s) below based on desired operating mode.\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard Mode – Keying.   Phono Keying Cable included with Amp.  Amp\/ATU selects band and freq. by using its internal frequency counter to measure TX freq. in this mode. Works with all radios with a keying output phono jack.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cstrong\u003eCBL-YAESUKEY\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eFT-817, FT818\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard Mode – Keying.  Incl. 8-pin MiniDIN to phono\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cb\u003eCBL-YAE-BANDKEY\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e\n\u003cspan\u003eFT-920, \u003c\/span\u003eFT990, FT1000 family, FT2000, FT5000, FT9000 family\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eIntermediate Mode. Incl. 8-pin DIN to DE15 cable for band data plus keying, plus Aux Cable to connect the KAT500 to the KPA500.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cb\u003eCBL-YAE-BKMINI\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eFT857, FT891, FT897, FT991, FT710AESS\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eIntermediate Mode. Incl. 8-pin MiniDIN to DE15 cable for band data plus keying, plus Aux Cable to connect the KAT500 to the KPA500.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cb\u003eCBL-YAE-BKDIN10\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eFT450, FTdx1200, FTdx10\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eIntermediate Mode. 10-Pin MiniDIN to DE15 cable for band data plus keying, plus Aux Cable to connect the KAT500 to the KPA500.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cb\u003eCBL-YAE-BKDA15\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eFTdx3000, FTdx101 Family\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eIntermediate Mode. DA15 to DE15 cable for band data plus keying, plus Aux Cable to connect the KAT500 to the KPA500.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff9900;\"\u003eIcom\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCable #\u003c\/th\u003e\n\u003cth\u003eIcom Model\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\n\u003cstrong\u003eE100416 \u003c\/strong\u003e (Included w\/ Amp)\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eIC7300, 7600, 7700, 7851, 9100\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard Mode – Keying.   Phono Keying Cable included with Amp. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cb\u003eCBL-ICOMKEY\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eIcom \"small\" radios: IC703, 706, IC7000\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard Mode. ICOMKEY to KAT500. Use Phono cable from the KAT500 to the KPA500. (Phono Cables incl. w\/Amp \u0026amp; Tuner.).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff9900;\"\u003eFlex\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCable #\u003c\/th\u003e\n\u003cth\u003eFlex Model\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\n\u003cstrong\u003eE100416\u003c\/strong\u003e(Included w\/ Amp)\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e Flex 3000, 5000\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard Mode – Keying.   Phono Keying Cable included with Amp. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cb\u003eCBL-FLEX-PWRCMB\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eFlex 6000-family\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eEnhanced mode. Incl. KUSB cable for freq. data, null modem cable, gender changer to KPA500 (Phone Cable for keying incl. w\/Amp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 style=\"text-align: left;\"\u003e\u003cspan style=\"color: #ff9900;\"\u003eKenwood\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCable #\u003c\/th\u003e\n\u003cth\u003eKenwood Model\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\n\u003cstrong\u003eE100416 \u003c\/strong\u003e (Included \u003cstrong\u003ew\/\u003c\/strong\u003e Amp)\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003ePhono Cable works with most radio models.  Please Select additional cable(s) below based on desired operating mode.\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard Mode – Keying.   Phono Keying Cable included with Amp. \n\u003cp\u003eAmp\/ATU selects band and freq. by using its internal frequency counter to measure TX freq. in this mode. Works with all radios with a keying output phono jack.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cstrong\u003eCBL-KENKEY\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eKenwood TS140, 430, 440, 450, 570, 820, 830, 850, 930, 940, 950, 2000\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard Mode-Keying.  Incl. 7-pin DIN to Phono Keying Cable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cb\u003eCBL-KENKEYM\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eTS-480\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard Mode -Keying.  Incl. 8-pin MiniDIN to Phono Keying Cable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\" style=\"text-align: left;\"\u003e\u003cb\u003eCBL-KENSER500\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eKenwood 580, 590, 890, 990\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eEnhanced Mode - Keying \u0026amp; Freq. Data. Incl. DE9 to 3.5mm 7-Pin Din, and CBL-KENKEY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Mode = Keying (amplifier to transmit mode) Amp’s internal frequency counter auto-selects band and ATU frequency.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntermediate Mode =\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eIntermediate Mode-Radios w\/BCD band data lines only. Keying plus band switching prior to TX.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eAmp’s internal frequency counter selects ATU frequency.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Mode = Keying \u0026amp; Frequency Data from radio select amplifier band and ATU frequency prior to TX.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDon't see your radio? \u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Tech Support\" href=\"https:\/\/elecraft.com\/pages\/get-support\" target=\"_blank\"\u003eContact us\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eVisit\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"KPA500 App Notes\" href=\"https:\/\/elecraft.com\/pages\/kpa500-application-notes\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor KPA500 App notes.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll Amateur Bands from 1.8 to 29.7 MHz and 50 to 54 MHz\u003cbr\u003e\u003cstrong\u003eSupply Voltage and Current\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e100 to 125 VAC or 200 to 250 VAC, 50\/60 Hz, approx. 1000 VA\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e26 lbs (11.8 kilograms)\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnclosure only, 4.0 x 10.8 x 10.0 in., HWD (10.2 x 27.4 x 25.4 cm). With projections, 4.4 x 10.8 x 11.8 in. (11.2 x 28.4 x 30.0 cm).  When installing, allow an additional 2” (5.1 cm) behind the fan and above the top cover for unrestricted air flow.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePower Output\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e500 watts PEP CW\/SSB\/Data\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDuty Cycle\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eat 500 Watts 10 minutes key down \/ 5 minutes standby\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDrive Power\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e30 to 40 watts for 500 watts output\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eInput VSWR\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLess than 1.5:1\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eALC Out\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNegative-going, adjustable\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMetering\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePower Output, SWR (bargraph and on the LCD display), supply voltage and current, temperature, frequency band\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePA Current\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e20 A maximum\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePA Voltage\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e60 VDC, nominal\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eHeat Sink\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTemperature 90°C, maximum\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eKey In\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+5V maximum, open circuit on receive, closed to ground on transmit (1 mA max.)\u003cbr\u003e\u003cstrong\u003eEfficiency\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApproximately 50%\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAccessories\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eACCESSORIES\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/kpak3aux_kpak3aux-optional-kpa500-to-k3-aux-cable-set\" title=\"KPAK3AUX CABLE SET OPTIONAL KPA500 TO K3S\/K3\" target=\"_blank\"\u003eKPAK3AUX\u003c\/a\u003e: Connects the KPA500 to K3\/K3S that enables all of the features of the K-Line.  This turns your K-Line into a complete, fully integrated 500 watt transceiver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAmplifiers Cables for Non-Elecraft Transceivers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/e770058_cbl-kenkey-kenwood-cable-for-the-kpa500-amp-and-kpa1500-amp\" title=\"Kenwood Keying Cable for Elecraft KPA500 Amplifier\" target=\"_blank\"\u003eKenwood Cable\u003c\/a\u003e for the KPA500\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/e770059_cbl-kenkey480-kenwood-cable-for-the-kpa500-amp-and-kpa1500-amp\" title=\"Kenwood Keying Cable for Elecraft KPA500 Amplifier\" target=\"_blank\"\u003eKenwood480 Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor the KPA500\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/e770060_cbl-yaesukey-yaesu-cable-for-the-kpa500-amp-and-kpa1500-amp\" title=\"Yaesu Cable for the Elecraft KPA500 Amplifier\" target=\"_blank\"\u003eYaesu Cable\u003c\/a\u003e for the KPA500\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/cbl-flexkey_cbl-flexkey-flex-keying-cable\" title=\"Flex Cable for the Elecraft KPA500 Amplifier\" target=\"_blank\"\u003eFlex Cable\u003c\/a\u003e for the KPA500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eParts \u0026amp; Mod Kits for the KPA500\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraft.com\/pages\/parts-mod-kits\" title=\"Parts and Mod Kits\" rel=\"noopener\" target=\"_blank\"\u003eVisit the QUICK ORDER Page, choose from the drop-down\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eREVIEWS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=V-PTEKc3fnI\"\u003eARRL Video Review of KPA500 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.ad5x.com\/images\/Presentations\/KPA500%20Review.pdf\"\u003eARRL Print Review of KPA500\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.google.com\/url?sa=t\u0026amp;rct=j\u0026amp;q=\u0026amp;esrc=s\u0026amp;source=web\u0026amp;cd=2\u0026amp;cad=rja\u0026amp;uact=8\u0026amp;ved=0ahUKEwi8gfz0rJbVAhWpslQKHWMTCJwQFggqMAE\u0026amp;url=http%3A%2F%2Fwww.eham.net%2Freviews%2Fdetail%2F9693%3Fpage%3D3\u0026amp;usg=AFQjCNEWrcKtv9OF41LyIhmfTRdxAnQxvg\"\u003eeHam Review of the KPA500\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: What do I need to operate KPA500 with a K3 or K3S?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: When you order the KPA500, please be sure to order the KPAK3AUX cable kit.  This provides Enhanced Mode operation with the K3\/K3S radios.  Enhanced Mode provides 2 power level settings on a per-band basis.  This allows the operator to have 2 RF output settings depending on whether the KPA500 is in Operate mode or in Standby mode.  Once set up, the operator does not have remember to turn down drive power from the K3\/K3S when switching the KPA500 into Operate mode.  This means fast search and pounce operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: I have 120 volts in the shack right now but plan to add 220 volts very soon.  How hard is it to change the KPA500 to another input voltage?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The KPA500 can be switched between 120 volts and 220\/240 volts AC without opening the cabinet.  The fuse block system also functions as the voltage changeover system.  All you have to do is to remove the fuse block, change the fuses to the proper amperage and then turn the fuse block over and reinsert it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Will the KPA500 work with my KX3 and KXPA100?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, it can.  You can drive the KPA500 to full output with the KX3\/KXPA100 combo. All the cables you'll need are in the KPA500 box assuming you're using the KXPACBL cable kit between the KX3 and KXPA100.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Is it possible to use a KX3 or KX2 directly with the KPA500?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, the KX3 and KX2 will drive the KPA500 to 220 watts (KX3 @ 15 watts) or 180 watts (KX2).  Please contact support@elecraft.com for details and cabling requirements\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: What cables come in the box with the KPA500?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: You will receive an AC cable that you specify when you order.   There is a USB-to-RS232 cable that will allow you to connect the KPA500 Utility, running on your computer, to the KPA500.   Lastly, there is an RCA plug-to-RCA plug cable provided that will connect many non-Elecraft radios for keying.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kpa500-500-watt-linear-amplifier-manuals\" title=\"KPA500 Manuals, Schematics and Programmer's Reference\" target=\"_blank\"\u003eKPA500 Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kpa500-application-notes\" title=\"KPA500 Enhancements, Alerts and Application Notes\" target=\"_blank\"\u003eKPA500 Enhancements, Alerts and Application Notes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraft.com\/pages\/kpa1500-kpa500-kat500-remote-software\" target=\"_blank\"\u003eKPA500 Remote Software\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraft.com\/pages\/kpa500-500-watt-linear-amplifier-firmware-and-utility\" title=\"KPA500 Firmware and Utility\" target=\"_blank\"\u003eKPA500 Firmware and Utility\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934354699,"sku":"KPA500-K","price":3659.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KPA500RT-900_24a2980f-24cf-4841-b0e0-525a2c71a09e.jpg?v=1549908184"},{"product_id":"kpak3aux_kpak3aux-optional-kpa500-to-k3-aux-cable-set","title":"KPAK3AUX_KPAK3AUX AUX Cable Set Optional KPA500 or KPA1500 to K3\/K3S\/K4 \u0026 some non-Elecraft radios","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe cable set interfaces the Elecraft KPA500 or KPA1500 amplifiers and the K3S, K3 or K4 transceivers.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003ch1\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThe KPAK3AUX cable set consists of two components:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15-Pin to 15-Pin DE-15 KPA500-K3 Aux cable (E850463)\u003c\/li\u003e\n\u003cli\u003eKey Line Interrupter adapter (E850462)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEnhanced functionality includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual power settings per band\u003c\/li\u003e\n\u003cli\u003eDirect band entry from the KPA500\/KPA1500 triggers the K3S, K3 or K4 to follow\u003c\/li\u003e\n\u003cli\u003eTracks K3S, K3 or K4 band changes automatically\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Key Line Interrupter provides integration for 3rd party devices to also control the KEY OUT signal from the K3S, K3 or K4 if required. Examples include SteppIR controllers, external tuners or screwdriver controllers.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Do I need to order the KPA3AUX cable kit for my KPA500 and\/or KAT500Z?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No.  \u003cspan data-mce-fragment=\"1\"\u003eYou can use the RCA-to-RCA cables that come in the box with the KPA500 or KAT500.\u003c\/span\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch1\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cdiv class=\"panel\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003ch1\u003e\u003cstrong\u003eMANUALS\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kpa500-500-watt-linear-amplifier-manuals\" title=\"KPAK3AUX Manual\" target=\"_blank\"\u003eKPAK3AUX Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934443019,"sku":"KPAK3AUX","price":42.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KPAK3AUX.JPG?v=1549417693"},{"product_id":"cbl36uhf_cbl36uhf-36-optional-coax-cable-with-pl-259s","title":"CBL36UHF_36\" Coax Cable with PL-259s","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eA high-power cable suitable for interconnections for the K3S, K3, KPA500, KAT500 and KPA1500. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe CBL36UHF is a coaxial cable terminated with industry standard PL-259 connectors.  These cables carry Elecraft's high standard of build and reliability.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength:  36 inch\u003c\/li\u003e\n\u003cli\u003eCable type:  LMR 240 or Beldin RG8X\u003c\/li\u003e\n\u003cli\u003eConnectors:  Silver plated PL-259\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Is this the only Elecraft RF cable available?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, this cable provides immediate interconnectivity for the K-Line products (KAT500, KPA500 and KPA1500).  For our international customers, this provides an easy, one-stop ordering opportunity to reduce paperwork for customs and importing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Is this cable suitable for the full 1500 watts from the KPA1500?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, we support this cable to be used with the KPA1500.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934541259,"sku":"CBL36UHF","price":43.95,"currency_code":"USD","in_stock":true}]},{"product_id":"kusb-extra-usb-serial-adapter-for-the-kpa500-ftdi-chipset","title":"KUSB_KUSB Serial Adapter Cable","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe KUSB cable enables computer communication with a number of Elecraft's products including, the KPA500, K3, P3, KRC2, W2 and K2.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe KUSB cable is a USB to RS232 adapter cable intended to support the connection the K3 Utility to the original K3, KPA500 and other Elecraft products.  It is supported on Windows, MacIntosh and x86 Linux operating systems.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUSB 2.0 connection\u003c\/li\u003e\n\u003cli\u003eFTDI chipset (may require download and installation of the FTDI driver for your operating system)\u003c\/li\u003e\n\u003cli\u003eDB9, 9 pin connector for use with many Elecraft radios and accessories.\u003c\/li\u003e\n\u003cli\u003eLength:  5 Ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ:  I have an Apple computer and a Linux computer.  Do I need to order the KUSB for those computers?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  The KUSB adapter cable can be used on most any MacIntosh or x86 Linux operating system.  You will need to download and install the appropriate driver from the FTDI web site. \u003c\/p\u003e\n\u003cp\u003eIf you have a USB port on your computers, we recommend the KUSB cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ:  I have an older laptop that still has a 9-pin COM port on it but it also has USB ports available.  Which cable should I use?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  Where possible, we always recommend the KUSB cable.  This cable provides the flexibility to connect to most any newer computer available today.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eK2 Connection Instructions \u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eK2 CONNECTION INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe KUSB cable cannot be directly plugged into the K2 without damaging components in the K2. A custom-built cable must be placed between any standard RS-232 connection and the K2 Aux I\/O connector. This pertains to PC's with existing RS-232 ports, USB to RS-232 converters and our own KUSB cable. Review \u003ca title=\"K2 Aux I-O Cable.pdf\" href=\"https:\/\/ftp.elecraft.com\/K2\/Mod%20Notes%20Alerts\/K2%20Aux%20I-O%20Cable.pdf\" target=\"_blank\"\u003ethese instructions\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003ein regards to using the KUSB with the K2.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934579787,"sku":"KUSB","price":47.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/KUSB.jpg?v=1762466953"},{"product_id":"pwr-us_pwr-us-iec-120v-u-s-power-cord-w-fuses","title":"PWR-US_IEC 120V U.S Power Cord w\/fuses, Select One (N\/C) w\/KPA500 Purchase","description":"","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934610635,"sku":"PWR-US","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/Pwr-USpowercord.jpg?v=1659113217"},{"product_id":"pwr-us240_pwr-us240-iec-u-s-240v-power-cord-w-fuses","title":"PWR-US240_US 240V Power Cord Exchange, Select One (N\/C) w\/KPA500 Purchase","description":"\u003cp style=\"margin-top: 3; margin-bottom: 3;\"\u003e\u003cb\u003eIEC-U.S. 240V Power Cord w\/fuses\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"margin-top: 3; margin-bottom: 3;\"\u003e\u003cb\u003e (\u003c\/b\u003eNEMA 6-15P suitable for 6-15R and 6-20R receptacles)\u003c\/p\u003e\n\u003cp style=\"margin-top: 3; margin-bottom: 6;\"\u003e\u003cspan style=\"color: #ff0000;\" color=\"#FF0000\"\u003e\u003cu\u003eExchange\u003c\/u\u003e \u003c\/span\u003efor IEC-US 120V power cord supplied with KPA-500\u003c\/p\u003e\n\u003cp style=\"margin-top: 0;\"\u003e\u003cspan style=\"color: #0000ff; font-family: Arial; font-size: small;\" face=\"Arial\" color=\"#0000FF\" size=\"2\"\u003e\u003ci\u003e(Only one PWR-EU2P, PWR-US240 or PWR-VKZL may be exchanged with the IEC US 120V cord that comes with the KPA500)\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934698187,"sku":"PWR-US240","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/PwrUS240powercord.jpg?v=1659113169"},{"product_id":"pwr-eu2pa_pwr-eu2pa-extra-iec-european-schuko-power-cord-w-fuses","title":"PWR-EU2P_Power Cord_IEC-European (Schuko) Power Cord w\/fuses, Select One (N\/C) w\/KPA500 Purchase","description":"\u003cp\u003ePWR-EU2P_IEC-European (Schuko) Power Cord w\/fuses\u003c\/p\u003e\n\u003cp style=\"margin-top: 3; margin-bottom: 6;\"\u003e\u003cspan style=\"color: #ff0000;\" color=\"#FF0000\"\u003e\u003cu\u003eExchange\u003c\/u\u003e \u003c\/span\u003efor IEC-US 120V power cord supplied with KPA-500\u003c\/p\u003e\n\u003cp style=\"margin-top: 3; margin-bottom: 6;\"\u003e\u003cspan style=\"color: #0000ff; font-family: Arial; font-size: small;\" face=\"Arial\" color=\"#0000FF\" size=\"2\"\u003e\u003ci\u003e(Only one PWR-EU2P, PWR-US240 or PWR-VKZL may be exchanged for the IEC US 120V cord that comes with the KPA500)\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934776203,"sku":"PWR-EU2P","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/Pwr-EU2ppowercord_0d560e0d-1315-4167-96cd-5b02db1b1404.jpg?v=1659123693"},{"product_id":"pwr-usa_pwr-usa-extra-iec-120v-u-s-power-cord-w-fuses-14-ga","title":"PWR-USa_Extra IEC 120V U.S Power Cord w\/fuses","description":"Extra IEC 120V U.S Power Cord w\/fuses. 14 ga.","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934830539,"sku":"PWR-USa","price":27.95,"currency_code":"USD","in_stock":true}]},{"product_id":"pwr-us240a_pwr-us240a-extra-iec-u-s-240v-power-cord-w-fuses","title":"PWR-US240a_Extra US 240V Power Cord","description":"\u003cp\u003e\u003cu\u003eExtra\u003c\/u\u003e IEC-U.S. 240V Power Cord w\/fuses\u003c\/p\u003e\n\u003cp\u003e(NEMA 6-15P suitable for 6-15R and 6-20R receptacles)\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934887435,"sku":"PWR-US240a","price":43.95,"currency_code":"USD","in_stock":true}]},{"product_id":"pwr-vkzla_pwr-vkzla-extra-iec-australian-power-cord-w-fuses","title":"PWR-VKZLa_Extra IEC-Australian Power Cord w\/Fuses","description":"\u003cp\u003e\u003cu\u003eExtra\u003c\/u\u003e IEC-Australian Power Cord w\/Fuses.\u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":32934957195,"sku":"PWR-VKZLa","price":27.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/PwrVKZLpowercord_e47bd08d-d5cf-4daf-aedc-535e89a41aa1.jpg?v=1659054338"},{"product_id":"kxio2-real-time-clock-general-purpose-outputs","title":"KXIO2_KX2 Real-Time Clock and General-Purpose Outputs (Kit)","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe KXIO2 option provides a real-time clock and two user-programmable outputs (\u003cstrong\u003eAUX\u003c\/strong\u003e jack). \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eThe time can be displayed in the KX2’s VFO B area and the TIME menu entry). Time accuracy can be fined-tuned to about +\/- 2 seconds per day using the RTC ADJ menu entry. The two AUX outputs can be used for controlling per-band external equipment such as an antenna switch or transverter (see the AUX 1 and AUX 2 menu entries). \u003c\/p\u003e\n\u003cp\u003eNote: The KXIBC2 replaces the previous KXI02 option module, retaining its RTC (real-time-clock) function. Both KXIO2 and KXIBC2 can not be installed in the KX2.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: What kind of things can I do with the general purpose (AUX jack) outputs on the KXIO2?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: You can use the Open Drain FET switches and the Menu settings to cause any sort of hardware change.  Further, you can use the Menu settings to make this happen on a per-band basis.  \u003c\/p\u003e\n\u003cp\u003eFor instance, you can connect up an antenna switch to the AUX port to have the KX2 select a different antenna every time you select 20 Meters.  Or, you can wire the AUX port so that you engage a preamp on 10M, for example.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Why might I want to use a real time clock instead of the elapsed time clock that is standard with the KX2?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Many portable operators want to reduce the weight of anything they take to mountain tops or on long hikes.  Some even track pack weight down to the ounce.  For those applications a real time clock supports the internal logging feature of the KX2.  This reduces the need to remember to manually record the QSO and reduces weight by not carrying pencil\/paper.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kx2-fully-portable-transceiver-manuals\" title=\"KX2 Options Manuals\" target=\"_blank\"\u003eKX2 Options Manuals\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35002136331,"sku":"KXIO2","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KXI02_af836a07-7912-40ee-99bf-43508507a8a9.jpg?v=1516046886"},{"product_id":"kxat2-internal-wide-range-20-w-atu","title":"KXAT2-F_KX2 Antenna Tuner Assembled","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eWith a KXAT2 automatic antenna tuner (ATU) installed, you can use non-resonant and narrow-band antennas with the KX2.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003eAntennas like this are very convenient for field operation.  An ATU can improve transmit power transfer and receive sensitivity.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum SWR:  Up to 10:1 \u003c\/li\u003e\n\u003cli\u003ePower Rating:  20 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: I am planning on using my KX2 when I travel.  Should I consider the KXAT2?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  You'll get the maximum performance out of the KX2 when you're using less-than-optimal antennas.  For instance, the KXAT2 was designed for portable, light weight antennas such as a wire thrown into a tree with some counterpoise wires (also known as radials) resting on the ground.  \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Do I need to install the KXAT2 if I am planning to use the 100 watt tuner in the KXPA100?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: It will depend on whether you intend to carry the KX2 with you for portable use or not. I\u003c\/p\u003e\n\u003cp\u003eThe KXAT2 fits inside the KX2 case which makes it a fully integrated tuner for the KX2.\u003c\/p\u003e\n\u003cp\u003eIf you intend to operate in your shack at 100 watts, then you'd likely need the internal KXPA100 antenna tuner (the KXAT100) but not the KXAT2.\u003c\/p\u003e\n\u003cp\u003eIf you're planning to operate the KX2 both in the shack with the KXPA100 but also take it out for portable work, we recommend the KXAT2 be installed.  This makes it easy to use one radio for both operating modes - the best of both worlds!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kx2-fully-portable-transceiver-manuals\" target=\"_blank\" rel=\"noopener noreferrer\" title=\"KX2 Options and Accessories Manuals\"\u003eKX2 Options Manuals\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kx2-application-notes\" target=\"_blank\" title=\"KX2 Options Mods and Notes\" rel=\"noopener noreferrer\"\u003eKX2 Options Mods and Notes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35002904715,"sku":"KXAT2-F","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KXAT2_Circuit_Board.jpg?v=1534017282"},{"product_id":"kxpd2-attached-precision-keyer-paddle","title":"KXPD2_KXPD2 Precision Keyer Paddle for KX2 and KX3","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cdiv\u003e\u003cstrong\u003eAttention New Look! The clear casing has been discontinued. The casing is now solid black. \u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe KXPD2 paddle is designed for use with the KX2 transceiver.  It mounts directly on the KX2 to provide smooth, stable and compact operation anywhere with the KX2 sitting flat or with its tilt foot deployed. The KXPD2 paddle can also be used on a KX3 transceiver.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv\u003eThe KXPD2 is a very compact mechanical keyer paddle that attaches directly to the front of KX2 (or KX3). This eliminates the need for a heavy keyer base. It includes a slot in which to store the contact-adjustment wrench.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/elecraft.com\/pages\/kx2-fully-portable-transceiver-manuals\" title=\"KX2 Accessories Manuals\" style=\"color: #0000ff; text-decoration: underline;\" target=\"_blank\"\u003eKX2 Accessories Manuals\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35003539595,"sku":"KXPD2","price":186.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/front.jpg?v=1658973597"},{"product_id":"k2-the-classic-hf-transceiver-full-kit","title":"K2 Transceiver Kit","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe K2 is a full-featured HF transceiver with the options you have come to expect from radios costing over twice as much.\u003c\/strong\u003e Two VFOs with multiple memories, split TX\/RX operation, RIT\/XIT, full break-in CW, memory keyer, narrow IF crystal filtering, excellent RX dynamic range and IF derived AGC are standard on the K2.\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance: \u003c\/strong\u003eWe've designed big rig features and performance into the \u003cstrong\u003eK2\u003c\/strong\u003e. Eric and Wayne are experienced CW operators, so solid CW performance (in addition to SSB) is a priority with the K2. Excellent sensitivity and dynamic range, Full QSK Break-in (diode switched), adjustable RX\/TX CW pitch, High Speed Memory Keyer, Selectable RX Sideband, and Sharp IF Crystal Filtering are standard. Check out our \u003ca href=\"https:\/\/ftp.elecraft.com\/K2\/Lab_Receiver_Test_Data_Comparisons.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eK2 Performance Number Comparisons\u003c\/strong\u003e\u003c\/a\u003e with other radios for more details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Power Consumption\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe K2 is designed for use both at home and in the field. The K2’s low receive current (approx. 150 mA in battery save mode) makes portable operation possible from small gel cell batteries. The K2 even includes an option for an internal 2.9-Ah rechargeable battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Alignment:\u003c\/strong\u003e No sophisticated test equipment beyond a digital multi-meter is required to align the \u003cstrong\u003eK2\u003c\/strong\u003e. Our built-in microprocessor and A\/D circuitry monitor all important signals and provide user feedback during calibration. They even include a built in general purpose frequency counter, volt meter and radio current drain meter. Our thousands of K2 owners will attest to their success building the K2!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizable:\u003c\/strong\u003e We've designed the K2 for easy user modification. All interfaces and signals are fully described in the manual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/k2-owners-information\" target=\"_blank\"\u003eInformation on K60XV Upgrade\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003eNote: This product is a kit which may involve building the product by selecting individual components, soldering them to the circuit board, winding toroids, installing LEDs and displays, calibrating circuits to meet specified performance levels. \u003c\/i\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003eKPA100 Amplifier Notice\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter twenty years of offering our kit-builders the KPA100, we have retired the amplifier. Several of the parts needed to build the amp are no longer available.  We will continue to provide support to our KPA100 customers. If you are looking for an amplifier option for your KPA100, please contact \u003ca href=\"https:\/\/elecraft.com\/pages\/get-support\" title=\"Elecraft Support\" target=\"_blank\"\u003eElecraft Support\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003ePackages\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eK2 Packages\u003c\/strong\u003e\u003c\/span\u003e \u003c\/h3\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31%; text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eK2 PAK 1\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.3054%; text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eK2 PAK 2\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.6946%; text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eK2 PAK 3\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31%; text-align: center;\"\u003eK2 HF Transceiver\u003c\/td\u003e\n\u003ctd style=\"width: 29.3054%; text-align: center;\"\u003eK2 HF Transceiver\u003c\/td\u003e\n\u003ctd style=\"width: 28.6946%; text-align: center;\"\u003eK2 HF Transceiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31%; text-align: center;\"\u003eKNB2 Noise Blanker\u003c\/td\u003e\n\u003ctd style=\"width: 29.3054%; text-align: center;\"\u003eKSB2 SSB Option\u003c\/td\u003e\n\u003ctd style=\"width: 28.6946%; text-align: center;\"\u003eKSB2 SSB Option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31%; text-align: center;\"\u003e\u003cstrong\u003e$35 Savings!\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.3054%; text-align: center;\"\u003eKNB2 Noise Blanker\u003c\/td\u003e\n\u003ctd style=\"width: 28.6946%; text-align: center;\"\u003eKNB2 Noise Blanker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31%; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.3054%; text-align: center;\"\u003e\u003cstrong\u003e$50 Savings!\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.6946%; text-align: center;\"\u003eKAT2 20W Internal ATU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 31%; text-align: center;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.3054%; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.6946%; text-align: center;\"\u003e\u003cstrong\u003e$75 Savings!\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSTANDARD FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRugged, attractive custom enclosure\u003c\/li\u003e\n\u003cli\u003eSmall, portable size: 2.9h x 7.8w x 8.2d inches\u003c\/li\u003e\n\u003cli\u003eWeight 3.3 lbs. (excluding internal options)\u003c\/li\u003e\n\u003cli\u003e80-10 meter ham band+ coverage; 160 m optional\u003c\/li\u003e\n\u003cli\u003eEfficient 12 Volt (10 - 15 V) operation for home or field\u003c\/li\u003e\n\u003cli\u003eReceive current as low as 150 mA (battery save mode)\u003c\/li\u003e\n\u003cli\u003eCW-only or SSB\/CW + Digital Modes with SSB option\u003c\/li\u003e\n\u003cli\u003eBack-lit LCD and LED bargraph; day\/night settings\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePLL synthesized--low phase noise\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMicroprocessor controlled\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 transverter bands; programmable display, I.F., power \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual VFOs with split operation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect keypad entry of frequencies and memory channels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRIT and XIT with four offset ranges \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in high-efficiency speaker \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMemories store mode, VFO A\/B, split, RX filter, etc. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSimple menu system for advanced settings. (Up to two menu functions can be assigned to the two programmable front panel function keys.) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eRoom for additional connectors on the rear panel \u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSmart ‘hunt and pounce’ band-scanning mode\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRECEIVER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow-noise, single-conversion superhet receiver\u003c\/li\u003e\n\u003cli\u003eDouble-balanced diode mixer for excellent dynamic range\u003c\/li\u003e\n\u003cli\u003eReceive sensitivity: 0.15 uV (pre-amp on, typical.)\u003c\/li\u003e\n\u003cli\u003eNarrow ham-band, double-tuned bandpass\u003c\/li\u003e\n\u003cli\u003eRX\/TX filters, relay switched for better IMD response\u003c\/li\u003e\n\u003cli\u003eSmooth, fast attack, I.F.-derived AGC (no \"popping\") \u003c\/li\u003e\n\u003cli\u003eSwitchable preamp and attenuator\u003c\/li\u003e\n\u003cli\u003eVariable-bandwidth I.F. crystal filtering\u003c\/li\u003e\n\u003cli\u003eMultiple VFO tuning rate selections\u003c\/li\u003e\n\u003cli\u003e10 Hz tuning resolution\u003c\/li\u003e\n\u003cli\u003eBar graph S\/RF OUT\/ALC meter\u003c\/li\u003e\n\u003cli\u003eAdjustable squelch \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTRANSMITTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable 0.1-15 W (K2), 0.1 – 100W (K2\/100)\u003c\/li\u003e\n\u003cli\u003eRugged, SWR-protected, push-pull PA transistors\u003c\/li\u003e\n\u003cli\u003eProgrammable current limit for battery operation\u003c\/li\u003e\n\u003cli\u003eHarmonics and spurious outputs: Better than –40 dBc \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCW FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull diode switched break-in with variable QSK delay (Both at QRP and 100W levels)\u003c\/li\u003e\n\u003cli\u003e9-memory keyer; iambic A and B; adjustable weight\u003c\/li\u003e\n\u003cli\u003e9-50 wpm (internal keyer); 70+ wpm (external keying)\u003c\/li\u003e\n\u003cli\u003eProgrammable message repeat interval\u003c\/li\u003e\n\u003cli\u003eSimultaneous computer and paddle CW keying inputs\u003c\/li\u003e\n\u003cli\u003eVariable bandwidth crystal filter (approx. 200 - 2000 Hz)\u003c\/li\u003e\n\u003cli\u003eAdjustable RX CW offset with tracking TX side tone.\u003c\/li\u003e\n\u003cli\u003eSelectable opposite sideband RX for QRM reduction \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\/Accessories\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOptions\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/kaf2_audio-filter\" title=\"KAF2 K2 AUDIO FILTER \u0026amp; REAL TIME CLOCK\" target=\"_blank\"\u003eKAF2 Audio Filter and Real-Time Clock\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/ksb2-ssb-option\" title=\"KSB2 SSB Adapter for the K2\" target=\"_blank\"\u003eKSB2 SSB Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/knb2_noise-blanker\" title=\"KNB2 High Performance Noise Blanker for the K2\" target=\"_blank\"\u003eKNB2 High Performance Noise Blanker\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/k160rx_160m-option\" title=\"K160M for the K2\" target=\"_blank\"\u003eK160M 160M and 2nd RX Port\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraft.com\/products\/ki02-rs-232-serial-interface\" title=\"KIO2 Serial Interface for the K2\" target=\"_blank\"\u003eKIO2 RS-232 Interface and Aux I\/0\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/kat2_20w-internal-atu\" title=\"KAT2 20W Internal ATU\" target=\"_blank\"\u003eKAT2 Automatic Antenna Tuner\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/kbt2_internal-battery-kit\" title=\"KBT2 Battery\" target=\"_blank\"\u003eKBT2 Battery\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eACCESSORIES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003e\n\u003ca title=\"ProSet-K2\" href=\"https:\/\/elecraft.com\/products\/proset-k2-a-boom-headset-for-elecraft-rigs\" target=\"_blank\"\u003eProSet-K2\u003c\/a\u003e, Boom Headset \u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\n\u003ca title=\"MH4 Hand Mic for the K2\" href=\"https:\/\/elecraftcom.myshopify.com\/products\/mh4-k2\" target=\"_blank\"\u003eMH4-K2, Hand Mic\u003c\/a\u003e for the K2 \u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003ca title=\"KRC2 Band Decoder\" href=\"https:\/\/elecraft.com\/products\/krc2-band-decoder-with-relays-k-line-and-k2\" target=\"_blank\"\u003eKRC2 Band Decoder\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/kpca-f_power-cable\" title=\"KPCA Power Cable\" target=\"_blank\"\u003eKPCA-F Power Cable, assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/kusb-extra-usb-serial-adapter-for-the-kpa500-ftdi-chipset\" title=\"KUSB SERIAL ADAPTER CABLE\" target=\"_blank\"\u003eKUSB USB Serial Adapter Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/ss30dv-25a-30a-surge-power-supply\" title=\"SS30DV Compact Switching Power Supply\" target=\"_blank\"\u003eSS30DV\u003c\/a\u003e Compact Switching Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eQST Magazine\u003c\/b\u003e\u003ci\u003e\u003cb\u003e: \u003c\/b\u003e \"The K2’s receiver performance compares very favorably to that of the samples of the high-end radios we’ve recently examined... The fact that a radio in this price class—and a home-built one at that—can stand proudly in such company is a remarkable accomplishment.\u003c\/i\u003e\"  March 2002 QST\u003cspan style=\"color: #000000; font-family: 'Times New Roman';\" face=\"Times New Roman\" color=\"#000000\"\u003e \u003ca title=\"NCJ K2 and K2\/100 Review\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/ncjk2100.pdf?7012707373024649415\" target=\"_blank\"\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"K2 Review, CQ Magazine Nov 2002\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/CQ_K2_100_Review.pdf?17267739206648287397\" target=\"_blank\"\u003eK2 Review, CQ Magazine\u003c\/a\u003e\u003cb\u003e, November 2002\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"NCJ K2 and K2\/100 Review\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/ncjk2100.pdf?7012707373024649415\" target=\"_blank\"\u003eK2 and K2\/100 Review from the ARRL NCJ (National Contest Journal, By Rick, N6XI (Mar\/Apr. 2003, pdf 270 KB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/PW_K2_review.pdf?17267739206648287397\" title=\"K2 Reveiw from Practical Wireless Magazine 2002\" rel=\"noopener\" target=\"_blank\"\u003eK2 Review from Practical Wireless Magazin\u003c\/a\u003e\u003ca title=\"K2 Reveiw from Practical Wireless Magazine 2002\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/PW_K2_review.pdf?17267739206648287397\"\u003ee\u003c\/a\u003e\u003cb\u003e (Dec. 2002, PDF)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS \u0026amp; DOWNLOADS\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"K2 Manuals \u0026amp; Downloads\" href=\"https:\/\/elecraftcom.myshopify.com\/pages\/k2-high-performance-transceiver-manuals\" target=\"_blank\"\u003eK2 Owner's, Options and Accessories Manuals\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraft.com\/pages\/k2-faqs\" title=\"K2 FAQs\" target=\"_blank\"\u003eK2 FAQs\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.powr.io\/form-builder\/i\/27631542#page\" title=\"Submit Your K2 or Classic Line Question\" target=\"_blank\"\u003e Ask Our K2 Tech!\u003c\/a\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraft.com\/pages\/k2-mods-and-notes\" title=\"K2 Mods and Notes\" target=\"_blank\"\u003eK2 Mods and Notes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraft.com\/pages\/logging-programs-that-support-k3-kx3-k2\" title=\"K2 Logging Programs\" target=\"_blank\"\u003eK2 Logging Programs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraft.com\/pages\/k3-k3s-kx3-and-k2-control-setup-programs\" title=\"K2 Control \u0026amp; Setup Programs\" target=\"_blank\"\u003eK2 Control \u0026amp; Setup Programs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ftp.elecraft.com\/K2\/Mod%20Notes%20Alerts\/K2%20Aux%20I-O%20Cable.pdf\" title=\"K2 Connection Instructions\" target=\"_blank\"\u003eK2 Connection Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Important Note:\u003c\/strong\u003e The KUSB cable cannot be directly plugged into the K2 without damaging components in the K2. A custom-built cable must be placed between any standard RS-232 connection and the K2 Aux I\/O connector. This pertains to PCs with existing RS-232 ports, USB to RS-232 converters and our own KUSB cable. Review the \u003ca title=\"K2 Connection Instructions\" href=\"https:\/\/ftp.elecraft.com\/K2\/Mod%20Notes%20Alerts\/K2%20Aux%20I-O%20Cable.pdf\" target=\"_blank\"\u003eK2 Connection Instructions\u003c\/a\u003e in regards to using the KUSB with the K2.  \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35143034699,"sku":"K2","price":1759.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/K2without100upgrade550px.jpg?v=1660681693"},{"product_id":"t1-miniature-stand-alone-atu-and-accessories","title":"T1-A_T1 Antenna Tuner, Assembled","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eWorld's Smallest Stand-Alone ATU!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Elecraft T1 is the only automatic antenna tuner that's sized to match today's small QRP rigs. It's one-fourth the size of most other compact ATUs. And at just 5 ounces, the T1 is the ideal backpacking accessory.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eUse with any Low-Power Transceiver\u003c\/b\u003e\u003cbr\u003eThe T1 can be used with any 0.5-W to 20-W transceiver covering bands in the 160-6 m range. This includes kits, home-built rigs, and commercial transceivers such as the FT-817, IC703, Ten-Tec Argonaut, SG2020, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eQuick, Convenient, and Accurate\u003c\/b\u003e\u003cbr\u003eThe T1's 7-inductor, 7-capacitor L-network provides a wide matching range, and its re-tune time from memory is just 1 to 2 seconds. Equally important, the T1 always tries to achieve a 1.0:1 SWR-it doesn't stop at 1.5:1 or 2.0:1 like some tuners. You won't even need to change modes to tune. You can use SSB voice or a keyer as well as a constant carrier (AM, FM, CW, etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUnsurpassed Technical Support\u003c\/b\u003e\u003cbr\u003eIf you have any difficulty, our technical support via telephone and the Internet will get your T1 up and running quickly. You can also get answers to nearly any question day or night from the helpful, tech-savvy hams on our e-mail user group.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003eInductance range: 0-7.5 μH in 128 steps\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eCapacitance range: 0-1300 pF in 128 steps\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eNetwork: Series L, shunt C (switchable)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eTuning times (typical): 2 to 8 seconds for initial\u003c\/div\u003e\n\u003cdiv\u003etuning; 1 to 2 seconds to re-tune from memory\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eFrequency range: 1.8 to 54 MHz\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eMax power: 20 W peak, 10 W continuous (10\u003c\/div\u003e\n\u003cdiv\u003eW peak on 6 meters)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eSWR\/power display: 1:1 to 3:1 and 0.5 to 10\u003c\/div\u003e\n\u003cdiv\u003ewatts on three LEDs (5 gradations)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eSupply voltage: 8 to 10 VDC; 9-volt Ultralife\u003c\/div\u003e\n\u003cdiv\u003elithium or alkaline battery recommended\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eCurrent drain: 20 mA average during TUNE;\u003c\/div\u003e\n\u003cdiv\u003e0 mA when off (auto power-off)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eSize: 4.4 x 2.5 x 0.9\" (11.2 x 6.3 x 2.3 cm)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eWeight: 5 oz. (0.14 kg)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003eSmall size, ideal for home, mobile, camping,\u003c\/div\u003e\n\u003cdiv\u003eand HF Pack use\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eStand-alone; works with any low-power rig\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e160 through 6 meter coverage\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eHandles up to 20 watts (10 W continuous)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eFinds lowest SWR; doesn't stop at 1.5:1 or 2:1\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eTunes in any mode (constant carrier, SSB voice,\u003c\/div\u003e\n\u003cdiv\u003eCW keying, AM, FM, packet, etc.)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eMany tune-ups are saved for fast re-tuning\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Elecraft T1 Miniature ATU for all Low-Power Transceivers Review\" href=\"http:\/\/www.eham.net\/reviews\/detail\/4956\"\u003eT1 Miniature ATU Ham Review\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Elecraft T1-FT817 Adapter (T1 ATU to Yaesu FT-817 transceiver)\" href=\"http:\/\/www.eham.net\/reviews\/detail\/4957\"\u003eeHam T1-FT817 Adapter (T1 ATU to Yaesu FT-817) Review\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: How does the T1 compare to the KAT2, KAT1, and KXAT1?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003eA: The T1 is intended for stand-alone use (with all QRP kits, home-built rigs, and factory-assembled transceivers such as the Yaesu FT-817, Icom IC-703, Ten-Tec Argonaut, and SG2020). It also includes coverage of 6 meters. In contrast, our other QRP ATUs are fully integrated with specific Elecraft HF transceivers, providing internal installation, instant ATU band switching, menu access to ATU information, and additional features.\u003c\/div\u003e\n\u003cdiv class=\"panel\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel\"\u003eFor example, the KAT2 has dual antenna jacks, per-antenna memories, direct readout of power or SWR on the \u003cplace\u003eK2\u003c\/place\u003e's LCD, and extended matching range on the lowest bands. All three of our internal ATU options also act as the SWR bridge\/wattmeter for their respective transceivers, which ensures good power-setting accuracy.\u003c\/div\u003e\n\u003cdiv class=\"panel\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eQ: What's the lowest power recommended for use with the T1?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: We recommend using 2 to 5 watts for initial tune-ups. But the T1 will auto-tune with as little as 0.5 watts, so it can be used effectively with nearly all available QRP rigs. If you want to do \"milliwatting\" with the T1, you may need to tune up at higher power first, then drop your transmitter's power during actual operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Can the T1 be built inside a Sierra, FT-817, or other transceiver?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes. The PC board is only about 2 by 3 inches, so it could be built into just about any rig. With some effort, the T1 could be installed inside the battery compartment of the FT-817. In the case of a Sierra, you could mount the T1 in the Sierra's top cover so that the switches and LEDs were accessible, then aim the BNC jacks out the back by cutting U-shaped channels down from the top. This is an ideal ATU for either rig, and it has been extensively tested with both (not to mention the K2, K1, and KX1).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: What modes can I use to tune the T1?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The T1 will tune using SSB voice or CW keying as well as a constant carrier (AM, FM, CW, packet, etc.). In the case of SSB voice, the ATU samples and averages peak voice power to establish a threshold that ensures accurate SWR measurement. Of course a constant carrier will reduce initial tune times compared to an intermittent voice or CW keyer waveform. But thanks to the T1's memories, re-tunes typically take just 1 to 2 seconds in any mode.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Many stand-alone ATUs stop tuning when they reach 1.5:1. How about the T1?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The T1 always tries to hit 1.0:1, and usually gets pretty close. This ensures maximum power transfer and takes best advantage of the low-pass characteristics of an L-network. Sometimes this extra effort to hit 1.0:1 means that the T1 will take a little longer to find a match, but finding the best match is usually more important than saving a couple of seconds on an initial tune.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Does the T1 have memories?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes. The T1 saves a large number of L-C settings from previous tune-ups, then tries these first when you start a TUNE operation. This cuts typical re-tune times to about 1 to 2 seconds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Can an automatic antenna tuner be safely used with all low-power rigs?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The vast majority of commercial, kit, and home-built transmitters have some form of protection from high SWR. This is important when using either a manual or automatic antenna tuner, because a wide range of impedances is presented to the final stage during tuning. SWR protection is often mentioned in the specifications or theory of operation section of a transceiver manual. If not, take a look at the schematic. If the transmitter includes ALC, current limiting, or voltage limiting (i.e., a zener diode at the PA collector), chances are it can be used at full power during auto-tuning. If you're not sure, do auto-tuning using no more than half the rig's maximum power output. Small transceivers of many types have been extensively tested at full power with the T1.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Does the T1 automatically re-tune when it senses high SWR?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No. We've found that this causes problems in some matching situations, and can drain the battery much more rapidly. Instead, the T1 re-tunes only when you want it to-either by holding the TUNE button or by transmitting within a few seconds of changing bands (if you have a remote-control adapter).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Will the T1 work with short whips such as you'd use for HF Pack or mobile operation?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes; it will usually extend the range of electrically short antennas to cover the entire nominal band and possibly nearby bands, too (without a coil or segment length adjustment). But these antennas can be very narrow-banded and\/or inefficient, so longer antennas are generally preferred when available. Please refer to the \"Antenna Recommendations\" section of the T1 Owner's Manual, which you can download from our web site.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Can the T1 be used as a remote tuner?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The T1 is intended for use near the operating position. But with a little effort it could be remoted, and its extremely small size would be beneficial for this purpose. First, the tuner must be placed in a weatherproof container if used outdoors. Second, controlling the tuner remotely requires a shielded control cable back to the operating position; this cable must supply, at minimum, a simple switch closure to wake up the tuner. It's also possible to create your own band-data interface from the rig to the ATU, as explained in the T1 Owner's Manual. Finally, you'll need an SWR bridge at the operating position since you won't be able to see the LEDs on the T1.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: How long will the T1's battery last?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: That depends on the battery type and how often you change bands or re-tune. Every effort was made to keep current drain low: we used latching relays, which draw no current once they're switched, and the T1 turns itself completely off when not tuning. Even with frequent use, an alkaline battery should last for many months, while a lithium (\"Ultralife\") battery should last for well over a year. The T1 checks the battery voltage on every power-up and will warn you when it starts getting low.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Is the T1 suitable for backpacking?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes-and it will save a lot of room and weight in your pack. It's just 4.4 by 2.5 by 0.9\", which is about one-fourth the size of other small ATUs and half the size of small manual tuners. Even more important for hikers is that it weighs only 5 ounces, including the internal battery. The closest competing ATU weighs three times as much.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: How can I protect the T1 and its controls during travel or backpacking?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The T1 is very rugged, so there's no need to pack it inside a separate travel container. Also, if the T1 gets turned on accidentally, it will shut itself off after just a few seconds. However, to prevent the T1 from ever getting turned on during transport, we recommend flipping the battery around so it doesn't make contact. This takes just a few seconds thanks to the integrated 9-V battery compartment and molded-in battery clips; there are no wires to deal with. (The T1 also includes reverse-polarity protection, so no damage will occur if you put the battery in backwards.)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Are there any surface-mount parts in the kit version of the T1?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No. The T1 kit uses all through-hole parts, so it's easy to build. You'll need a temperature-controlled soldering iron with a fine tip, and flush-cutters for close trimming of component leads. Tools and soldering techniques are discussed in the professionally written, illustrated assembly manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Why are you offering a special remote-control adapter for the FT-817?\u003c\/h3\u003e\n\u003cp class=\"panel\"\u003eA: The T1- FT817 is popular with HF Pack operators, who sometimes hop among designated frequencies on different bands. Our remote-control adapter (model T1-FT817) monitors the rig's band-data output signal so the proper L and C settings for the ATU can be recalled instantly on any band change, without transmitting. This reduces QRM and conserves both tuner and transceiver battery life. We may offer similar interfaces for other low-power rigs in the future.\u003c\/p\u003e\n\u003ch3\u003eQ: Why isn't the optional T1-FT817 remote-control adapter available as a kit?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: We're only offering the T1-FT817 adapter assembled because it includes a very small PC board with 0402-size surface-mount components (translation: very hard for most people to solder). This PC board is located inside the mini-DIN connector at the transceiver end, which minimizes RF pickup on the band-data line. A shielded cable is used to route the adapter's output signals to the T1.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Does the T1-FT817 remote-control adapter work with \"one-touch-tuning\" interfaces?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: A third-party \"one-touch-tune\" (OTT) unit can be used with the T1 ATU, if desired, although the T1 doesn't require a constant carrier for tuning. Using both an OTT unit and the T1-FT817 adapter is also possible, but this may make the transceiver and tuner more susceptible to RFI, as well as less physically robust during mobile or HF Pack operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Can the T1 track K2 band changes by connecting it to the transceiver's AuxBus output?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Not at present. Meanwhile, as mentioned above, we think you'll find the fully integrated KAT2 an excellent tuner for use with the K2.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/elecraft.com\/pages\/t1-automatic-tuner-manuals\" title=\"T1 Manuals\" target=\"_blank\"\u003eT1 Owner's Manual, Assembly Manual \u0026amp; Accessories Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35144533835,"sku":"T1-A","price":395.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/T1_photo_b1_500_896dca1b-dc93-479b-b81c-b491512ac820.jpg?v=1550178407"},{"product_id":"krc2-band-decoder-with-relays-k-line-and-k2","title":"KRC2  Band Decoder","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe Elecraft \u003cb\u003e KRC2 Band Decoder\u003c\/b\u003e is a universal, programmable station control unit that can switch any combination of antennas, filters, amplifiers, or other equipment. It \u003cb\u003e supports analog, digital, and RS232 control inputs\u003c\/b\u003e, so it's compatible with transceivers from Icom (voltage level), Yaesu (BCD and voltage level), and Kenwood (serial or BCD via logging program), as well as Elecraft's own K3S and K2.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003eOverview\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThe KRC2 includes decoded \u003cb\u003e outputs for all HF - 6M bands\u003c\/b\u003e (including WARC bands),\u003cb\u003e three transverter bands\u003c\/b\u003e, and general accessories. \u003cb\u003e High-side (source) and low-side (sink) relay drivers are included.\u003c\/b\u003e All signal lines are RF bypassed to eliminate RFI and noise pickup.\u003cbr\u003e\u003cbr\u003eIndividual driver outputs can be \"wire-ORed\" as with conventional decoders. However, the KRC2 also provides a PC-based command interface, allowing the user to configure the unit with simple text commands. New firmware can even be downloaded via the internet. The combination of these features makes the KRC2 uniquely suited to the user's present as well as future station control needs.\u003cbr\u003e\u003cbr\u003eThe KRC2 is fully integrated with Elecraft's transceivers, decoding band-change data via the company's AuxBus protocol. But other unique K2 features are also supported that can be enabled or disabled with jumpers inside the KRC2. The K3S and K2's ACC menu entry can be used to directly control the KRC2's accessory outputs. Four buttons on the top of the KRC2 can be used as \"hot keys\" for instant access to CW message buffers, fast switching of the rig's RXANT jack, or other functions. Finally, the KRC2 can act as a complete CW-feedback interface for the K2 and K3S, allowing enhanced accessibility for operators with special user interface requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThe easy-to-build kit uses Elecraft's \"no-wires\" construction and is suitable for first-time kit builders.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutputs: 32 (16 sink, 16 source)\u003c\/li\u003e\n\u003cli\u003eOutput Driver Ratings: 500 mA max, 50 V max (sink and source)\u003c\/li\u003e\n\u003cli\u003eAnalog Inputs:  0-5 V (1 input), 0-10 V (2 inputs)\u003c\/li\u003e\n\u003cli\u003eBand Decode Formats:  Elecraft, Icom, Yaesu, Kenwood\u003c\/li\u003e\n\u003cli\u003eInternal Current Drain:  Approx. 20 mA (excludes output driver current)\u003c\/li\u003e\n\u003cli\u003eSize:  5.5\" (L) x 3.5\" (D) x 1.5\" (H) (14 x 11.4 x 4 cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eReviews\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"KRC2 eHam Review\" href=\"http:\/\/www.eham.net\/reviews\/detail\/3735\"\u003eK\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"KRC2 eHam Review\" href=\"http:\/\/www.eham.net\/reviews\/detail\/3735\" target=\"_blank\"\u003eRC2 eHam Review\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Is the KRC2 supported by both the K3S and K3?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  In addition to the K2, there is full, integrated support for the KRC2 from both rigs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: How can the KRC2 be used to control my remote antenna switch?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The KRC2 reads the band selected on the K3S, K3 or K2 directly and then can be configured to select one of more relays that you wire up to the terminals inside the KRC2.  Using the freely-downloadable Control Program, you can map the exact terminals you want to engage for each band of the radio.  In this way, you can integrate most any Antenna Controller directly into the K3S or K2.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" title=\"KRC2 Antenna Switch Controller Manuals\" href=\"https:\/\/elecraft.com\/pages\/krc2-antenna-switch-controller-manuals\" target=\"_blank\"\u003eKRC2 Antenna Switch Controller Manuals\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" title=\"KRC2 Firmware and Program Downloads\" href=\"https:\/\/elecraft.com\/pages\/krc2-firmware-and-utility\" target=\"_blank\"\u003eKRC2 Firmware and Program Downloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35204366155,"sku":"KRC2","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KRC2_1_500_99aeea1e-07bc-43af-9b83-6609f98c33a8.jpg?v=1519862834"},{"product_id":"pr6-10-low-noise-pre-amp-k-line","title":"PR6-10 AMP","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cdiv\u003eThe PR6-10 is a high-performance, low-noise preamp that can be used with the Elecraft K3 or other transceivers for added gain on the 10 Meter and 6 Meter bands.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eNote that the K3S has similar functionality built into that radio.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003eIt's especially well-suited for the K3, which has exceptional dynamic range, yet can benefit\u003c\/div\u003e\n\u003cdiv\u003efrom additional gain for weak signal work. The noise figure of the preamp itself is typically 0.7 dB.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePower for the PR6\/PR6-10 can be obtained from any 11 to 14 VDC supply. When used with a K3, the PR6\/PR6-10 can be powered from the switched 12 VDC accessory output.\u003c\/li\u003e\n\u003cli\u003eWhen used with the Elecraft K3, the K3 must be equipped with the KXV3 option. The PR6\/PR6-10 can be connected directly to the KXV3 RX ANT IN\/OUT jacks on the K3's rear panel where it can be switched in automatically by the transceiver on the desired bands. A second pair of jacks is provided on the opposite side of the PR6\/PR6-10 to allow use of the K3's normal RX ANT IN\/OUT signal path when the preamp is not in use.\u003c\/li\u003e\n\u003cli\u003eThe PR6\/PR6-10 can be strapped permanently ON, or it can be turned on and off externally from an open-source\/open-drain logic signal.  When used with an Elecraft K3, the DIGOUT1 control line on the 15-pin ACC jack can be used to enable the preamp on the desired bands. Please refer the K3 Owner’s manual CONFIG menu description for DIGOUT1 details.\u003c\/li\u003e\n\u003cli\u003eThe PR6\/PR6-10 is housed in a rugged, custom-machined enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003eFrequency Coverage: 22 - 54 MHz\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eNoise Figure: \u0026lt; 0.7 dB typical\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eGain: 20 dB nominal\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eIMDDR: \u0026gt; 100 dB typical (when used with an Elecraft K3 transceiver)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003ePower Requirements: 11 to 14 VDC: 13.8 VDC @ 70 mA nominal\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eSize: Case: 2-1\/4” x 2-5\/16” x 3\/4” (5.72 x 5.87 x 1.91 cm)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eWeight: 3 oz (90 grams)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eREVIEWS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/10627\" title=\"PR-6 eHam Review\"\u003ePR6 eHam Review\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Can I use the PR6\/PR6-10 with the K3S?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: This is not recommended. While it can be connected to the K3S, the K3S already has the same preamp built right into the radio. Adding another preamp, generally, would only serve to raise the noise floor and add little to the initial preamp built into the K3S.\u003c\/p\u003e\n\u003cp\u003eThe original K3, however, will benefit from adding the PR6-10 and is recommended for that reason.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: How can the PR6\/PR6-10 be used with other radios?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The PR6-10 can be added into any other radio that uses a receive-only antenna connection. Further, it has a control signal so that it can be switch in and out of the receive antenna circuit when commanded by the radio or from a separate switch system designed by the operator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Is the PR6-10 designed to be mounted at the antenna in addition to inside the shack?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No, the PR6-10's case has been designed for operating inside the shack. While it can be mounted remotely, the operator would need to install a suitable weather-proof cabinet for it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/pr-series-preamp-manuals\" target=\"_blank\" title=\"PR Series Manuals, Schematics and Programmer's Reference\" rel=\"noopener noreferrer\"\u003ePR Series Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35204428555,"sku":"PR6-10","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/PR6-10_Low_Noice_Pre-AmpJPG_b3f429b5-2615-4340-8770-75d5446ce91b.JPG?v=1505264458"},{"product_id":"ss30dv-25a-30a-surge-power-supply","title":"SS30DV_SS30DV Compact Switching Power Supply","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eCompact Power Supply for Elecraft Radio systems, including the K4, K3S, and KX3\/KXPA100 combo.  The small footprint and ruggedness provide one all-purpose power supply to work in the small shack or for vacation or 2nd house use.  It allows the operator to purchase a single power supply to support expanding the radios with peripherals and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThe SS30DV is designed to supply 25 Amps continuous (up to 5 minutes) and 30 Amps surge at 14.1 VDC. It is the perfect companion supply for the Elecraft K4, K3, K2\/100, KX3 with KXPA100 and most other rigs. Cabling can be connected to either the rear, 5-way binding posts or the dual front Powerpole connectors.\u003c\/p\u003e\n\u003cp\u003eThe SS30DV supports all the peripherals for a K-Line (K3S, P3, KAT500) or the KX-Line (KX3\/KX2, KXPA100 and PX3). \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eElectrical specifications:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Range: 100-120 VAC or 200-240 VAC, 50\/60Hz (Switchable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eOutput Voltage: 14.1 VDC fixed\u003c\/li\u003e\n\u003cli\u003eOutput Amperage: 25 continuous (up to 5 minutes), 30 surge\u003c\/li\u003e\n\u003cli\u003eInternal Protection: Thermal, over current\u003c\/li\u003e\n\u003cli\u003eInternal Input Fuse: 6.3 Amps at 115 VAC\u003c\/li\u003e\n\u003cli\u003eRipple Peak-to-Peak Max. \u0026lt;100mVpp\u003c\/li\u003e\n\u003cli\u003eNoise Peak-to-Peak Max. \u0026lt;100mVpp\u003c\/li\u003e\n\u003cli\u003eOperating temperature rating: 0 – 50 °C\u003c\/li\u003e\n\u003cli\u003eStorage temperature: -20 – 85 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePhysical dimensions and materials:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShipping Weight: 4.0 lbs.\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 6.1 x 5 x 2.5 in (154mm long, 127mm wide, 63mm tall)\u003c\/li\u003e\n\u003cli\u003eFan: Quiet internal cooling fan\u003c\/li\u003e\n\u003cli\u003eMachined metal case front bezel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAccessories\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eACCESSORIES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e \u003ca rel=\"noopener noreferrer\" title=\"E980262 Power Cable, 3ft, APP to 2.1MM connector\" href=\"https:\/\/elecraftcom.myshopify.com\/products\/e980262-power-cable-with-app-connectors\" target=\"_blank\"\u003eE980262\u003c\/a\u003e    \u003cspan class=\"style73\"\u003ePower Cable, 3 ft, Assembled with APP Conn. 2.1mm connector at the other end. Use this cable to connect these peripherals to the SS30DV:  KX3, PX3, KX2, K1, K2, KX1, KAT500, W1, W2\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/app_to2_1sm_large.jpg?v=1502729354\"\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" title=\"KPCA-F Power Cable\" href=\"https:\/\/elecraftcom.myshopify.com\/products\/kpca-f_power-cable\" target=\"_blank\"\u003eKPCA-F\u003c\/a\u003e    \u003cspan class=\"style73\"\u003ePower Cable, 5 ft, Assembled with Anderson Power Pole connectors on one end and #12 circular ring lugs at other end. This cable is included with all new K3Ss and KXPA100s\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSS30DV Power Supply \u003ca rel=\"noopener noreferrer\" title=\"SS30DV Power Supply eHam Review\" href=\"http:\/\/www.eham.net\/reviews\/detail\/9429\" target=\"_blank\"\u003eeHam Reviews\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ:  Why did Elecraft select the Power Werx SS30DV power supply to sell?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  Elecraft found that the Power Werx SS30DV worked for power their demo booths at Hamfests for well over 3 years.  We're confident that it meets our criteria for a low-noise, small sized power supply suitable for very small shacks yet can support an entire K-Line or KX-Line of products, as our customers expand their systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ:  Does the fan run all the time?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  Yes, but its speed will vary on the transmitting load.  When receiving, the fan cannot be heard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Do I have to adjust the output voltage on the SS30DV to operate with my Elecraft gear?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No.  The SS30DV is factory-adjusted to provide input voltage for Elecraft radios to meet specified RF output specs, 13.8 volts DC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ:  I'd like to order the SS30DV but I live outside the US.  Can I order cables with the proper AC plug for my region?  will it work with 220\/240 volt outlets?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  Yes.  Please order the proper AC plug\/cable from the list of cables available for the KPA500.  You can find these on the \u003ca rel=\"noopener noreferrer\" title=\"KPA500 Amplifier Order Page\" href=\"https:\/\/elecraftcom.myshopify.com\/products\/kpa500-compact-160-6-m-solid-state-amplifier\" target=\"_blank\"\u003eKPA500 product order page.\u003c\/a\u003e  The SS30DV can be switched to operate world wide in 120 volt or 220\/240 volt AC power distribution systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" title=\"SS30DV MANUAL\" href=\"https:\/\/elecraftcom.myshopify.com\/pages\/power-supply-manuals\" target=\"_blank\"\u003eSS30DV Power Supply Manuals\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35204460427,"sku":"SS30DV","price":187.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/SS-30DV_550.jpg?v=1523642538"},{"product_id":"mh4-k-line-and-k2","title":"MH4 Hand Held Microphone (K4,K4\/0,K3S,K3)","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe MH4 microphone is designed for use with the Elecraft K4, K4\/0, K3, and K3S transceivers.\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThe MH4 microphone contains a high-performance condenser microphone element optimized for SSB, AM and FM use.  It also has a Push-to-Talk button and two function buttons to control the transceiver from the microphone.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondenser element (required bias voltage)\u003c\/li\u003e\n\u003cli\u003e8-pin connector for use with K3\/K3S transceivers\u003c\/li\u003e\n\u003cli\u003ePTT button\u003c\/li\u003e\n\u003cli\u003e2 Up\/Down function buttons\u003c\/li\u003e\n\u003cli\u003e2 foot (60 cm) coiled cord, can extend to 4 feet (90 cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: How is the MH4 different from the MH2?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The MH4 is a direct, plug-compatible microphone to the MH2.  Unlike the MH2, it is housed in a smaller form that fits into the hand easily, making it easier to store or carry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: The MH4 looks very much like the MH3 used with the KX3 and KX2, can it be used interchangeably?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The housing used for the MH3 and MH4 are the same but the connection plugs are different.  For that reason, they are designed to be connected to their respective radios without an adapter cable in their native form.  The enterprising ham, however, is welcome to build adapter cables.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eManuals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/headsets-mics-manuals\" title=\"Hand Microphone Manuals\"\u003eM\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"Hand Microphone Manuals\" href=\"https:\/\/elecraftcom.myshopify.com\/pages\/headsets-mics-manuals\" target=\"_blank\"\u003eH4 Hand Microphone Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/headsets-mics-manuals\" title=\"Hand Microphone Manuals\"\u003e\u003c\/a\u003e  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35204651275,"sku":"MH4","price":87.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/MH4.jpg?v=1503429413"},{"product_id":"mh3-kx-line","title":"MH3 Hand Microphone (KX-LINE)","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eA portable hand microphone for use with the KX2 and KX3.  PTT button and UP\/Down buttons for single-hand frequency selection or scanning.  \u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"372\" data-start=\"324\"\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThe MH3 microphone has an electret element to capture the natural voice, yet is lightweight and small enough to fit into a portable 'go bag' or backpack.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eElement:  Electret (requires bias voltage)\u003c\/li\u003e\n\u003cli\u003ePlug:  1\/8 inch (3.5mm) Tip\/Ring\/Ring\/Sleeve plug (TRRS)\u003c\/li\u003e\n\u003cli\u003eWarranty:  1 year, parts and labor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Can the MH3 be used with other radios?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, it can.  You will likely need to rewire the plug or build an adapter cable to do so.  Remember that the MH3 uses an electret element so, therefore, will need to have a bias voltage applied to the mic elements.  Most radios today can supply this internally with a menu setting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Will the MH3 work on the KX3 and KX2?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  Both radios were both designed to support the MH3's features.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eManuals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" title=\"Hand Microphone Manuals\" href=\"https:\/\/elecraftcom.myshopify.com\/pages\/headsets-mics-manuals\" target=\"_blank\"\u003eMH3 Hand Microphone Manuals, Schematics and Programmer's Reference\u003c\/a\u003e  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35204764555,"sku":"MH3","price":87.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/mh3_575.jpg?v=1576374885"},{"product_id":"bl2-balun","title":"BL2_BL2 250W 1:1 \u0026 4:1 (switched) Balun","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cdiv\u003eThe Elecraft BL2 is a ruggedized general-purpose wideband balun that can be configured as either a 1:1 or 4:1 balun by means of a slide switch. It is intended to match balanced feed lines to the unbalanced antenna connection of an Elecraft or other manufacturer’s transceiver or antenna tuner.\u003c\/div\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eOur highly efficient balun can handle up to 250 watts and can handle 1:1 and 4:1 ratios via an onboard switch. It is very small (just 1.5 x 3\") and lightweight, making it an excellent choice for both home and field use. It uses a special winding technique to reduce losses and extend the useful range, resulting in an SWR of less than 1.2:1 from 500 kHz to 55 MHz (200-ohm load). It includes rugged screw terminals for the balanced output as well as ground and can be used in a variety of matching applications.\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eNote: This product is a kit that may involve building the product by selecting individual components, soldering them to the circuit board, winding toroids, installing LEDs and displays, calibrating circuits to meet specified performance levels. \u003c\/i\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003ePower Rating: 250 watts with a matched load.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eBandwidth: Input VSWR less than 1.25 when connected to a 200-ohm resistive load, 500 kHz to 55MHz\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/5646\" title=\"BL2 Balum eHam Review\"\u003eB\u003c\/a\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/5646\" target=\"_blank\" title=\"BL2 Balum eHam Review\" rel=\"noopener\"\u003eL2 Balum eHam Revie\u003c\/a\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/5646\" title=\"BL2 Balum eHam Review\"\u003ew\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/mini-module-test-and-pickup-manuals\" title=\"BL2 Operating Manual\" target=\"_blank\"\u003eBL2 Wideband Balun Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35206749003,"sku":"BL2","price":76.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/BL2_View_1_500.jpg?v=1519952733"},{"product_id":"xg3","title":"XG3 RF Signal Source","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe XG3 is a powerful programmable signal source that fits in the palm of your hand.\u003c\/p\u003e\n\u003cdiv\u003eIt's a versatile tool that may be used for receiver testing, receiver alignment, RF signal tracing and troubleshooting and may even serve as a VFO or local oscillator for homebrew projects\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cb\u003e\u003cspan size=\"4\" color=\"#0000FF\" style=\"font-size: large;\"\u003e.\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe XG3 is a miniature RF signal source that provides output from 1.5 MHz through 1400 MHz. Four commonly used selectable output levels are calibrated from 1.5 through 200MHz.\u003c\/p\u003e\n\u003cp\u003eThe XG3 may be operated from its internal battery or from an external 11-14VDC source. It is housed in a protective enclosure with easy-to-use front panel switches and LED indicators.\u003c\/p\u003e\n\u003cp\u003eSince the XG3 is small and portable it’s ideal for quickly checking the performance of equipment in the field as well as at the home station. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003eFrequency Range: 1.5-200 MHz range, with a typical resolution of 1-24 Hz. (Up to 1400MHz via harmonics)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eFrequency Stability:  ±50 ppm, maximum.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eSignal Characteristics: Highly stable RF square wave; phase noise -105 dBc\/Hz\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eReverse Power: Shunt diodes and a fusible pc trace link provide limited protection.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003ePreset Frequencies: 12 frequencies preset at the factory - one in each Amateur band from 160 through 2 meters. Frequencies may be changed using a personal\u003c\/div\u003e\n\u003cdiv\u003ecomputer.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eSweep Mode: Two frequency ranges preset. The sweep speed and the frequency\u003c\/div\u003e\n\u003cdiv\u003eincrement for each step may be programmed using a personal computer.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eComputer Interface: RS-232 or USB: Allows changing the preset frequencies and operating the XG3 from a personal computer using the XG3 Utility program available free from Elecraft.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eSelectable Output Levels: Four levels, calibrated from 1.5 through 200 MHz:\u003c\/div\u003e\n\u003cdiv\u003e0 dBm (± 3 dB), -33 dBm, -73 dBm, - 107 dBm (± 1 dB typ).\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eOutput Impedance: 50 ohms.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003ePower: Internal 9-volt battery or external 11-14 VDC supply\u003c\/div\u003e\n\u003cdiv\u003ePower Consumption: External supply, 60 mA maximum at 0 dBm output. Less at lower output levels.  Internal battery drain, up to 50 mA at 0dBm output, 25 mA typical at lower output levels.  Programmable automatic power shutoff.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eFrequency Resolution:  Limited by the internal PLL divisor\u003c\/div\u003e\n\u003cdiv\u003eprecision. Typical values are as follows:\u003c\/div\u003e\n\u003cdiv\u003e1.5 to 66 MHz:    1 to 10 Hz.\u003c\/div\u003e\n\u003cdiv\u003e67 to 159 MHz:   1 to 12 Hz.\u003c\/div\u003e\n\u003cdiv\u003e160 to 200 MHz: 1 to 24 Hz\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eAccessories\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eACCESSORIES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/at1-step-attenuator-kit\" title=\"AT1  41 dB Step Attenuator Kit\" target=\"_blank\"\u003eAT1  41 dB Step Attenuator Kit \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/bnc-mm_male-male-bnc-connector\" title=\"BNC-MM  BNC Make-to-Male connector\" target=\"_blank\"\u003eBNC-MM  BNC Make-to-Male connector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/bnc-uhf-easily-adapt-your-so-239-coax-to-a-bnc-antenna-port-on-your-radio\" title=\"BNC-UHF  BNC to SO-239 adapter\" target=\"_blank\"\u003eBNC-UHF  BNC to SO-239 adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/9807\" title=\"XG3 eHam Review\"\u003eX\u003c\/a\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/9807\" title=\"XG3 eHam Review\" rel=\"noopener\" target=\"_blank\"\u003eG3 RF Signal Source eHam Revie\u003c\/a\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/9807\" title=\"XG3 eHam Review\"\u003ew\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/youtu.be\/vhrW4UkJ2_U\" title=\"XG3 RF Signal video\"\u003eX\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"XG3 RF Signal video\" href=\"https:\/\/youtu.be\/vhrW4UkJ2_U\" target=\"_blank\"\u003eG3 RF Signal Source Vide\u003c\/a\u003e\u003ca href=\"https:\/\/youtu.be\/vhrW4UkJ2_U\" title=\"XG3 RF Signal video\"\u003eo\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ: What cables come in the box with the XG3?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  The XG3 will include a KXUSB. The KXUSB cable connects the XG3 to a computer for customized set up of the XG3 operation using the XG3 Utility.   This is a free utility available for download from the \u003ca href=\"https:\/\/elecraft.com\/pages\/xg3-firmware-and-utility\" target=\"_blank\"\u003eElecraft Firmware and Software site\u003c\/a\u003e. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: In addition to generating a continuous wave (CW) signal, what modulation does the XG3 produce?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The XG3 can be programmed to send RTTY in addition to CW for some applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: What other applications can I use an XG3 for?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  In addition to generating RF signals for testing, the XG3 can be used as a \u003cstrong\u003ebeacon\u003c\/strong\u003e and for \u003cstrong\u003efox hunts\u003c\/strong\u003e.  You can set the XG3 up to send messages at repeating intervals for those applications.  Further, you can have these messages sent in CW and RTTY modes.  See the XG3 Owner's Manual for the details on how these can be set up and operated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eQ: Can I use the XG3 to test Minimum Discernible Signals (MDS) and other receiver performance specs?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  The XG3 can produce the signals needed to perform basic performance measurements even if you are not in the shack.  Further, the XG3 Owner's Manual provides some stepped procedures to show you how to perform the tests.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eQ: Can I quickly test S9 specs on a transceiver?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, the XG3 produces pre-calibrated signal levels on all the ham bands for quick testing even if you're at a flea market.\u003c\/p\u003e\n\u003cp\u003eThe XG3 has been produced with the amateur operator's need in mind.  Unlike a lab-grade signal generator, the XG3 contains all the functions needed by the amateur operator such as, testing for S9, selecting frequencies in the ham bands and self-contained, battery power for portability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eQ: How can I make the XG3 produce signals of different magnitudes beyond what I can select with the XG3 controls?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: You can use the XG3 in addition to our AT1 Attenuator kit to provide varying signal levels beyond what you can select directly from the XG3's front panel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eQ: To connect the XG3 to receivers, what adapters does Elecraft provide?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  You can order both a BNC Male-to-BNC Male adapter.  This is used with QRP radios that typically use the BNC connector for the antenna connection.   We also have the BNC-to-SO239 adapter, which allow the typical PL259 connectors on antenna cables to be used.  These can be ordered at the same time as the XG3.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraft.com\/pages\/xg3-sweep-and-signal-generator-manuals\" title=\"XG3 Manuals, Schematics and Programmer's Reference\" target=\"_blank\"\u003eXG3 Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35207239691,"sku":"XG3","price":417.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/XG3_550.jpg?v=1518590481"},{"product_id":"2t-gen-2-tone-generator","title":"2T-GEN_2T-Gen 2-Tone Test Generator(700, 1900 Hz)","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe Elecraft 2T-gen is a 2-Tone test oscillator that can be used to make distortion measurements on SSB transmitters and amplifiers. The 2T-gen is battery operated and provides sufficient output level to be connected directly to the microphone connector of almost any transceiver.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eHow do you know how clean your HF SSB transmitter or amplifier is? One of the most important performance measurements is Transmit Intermodulation Distortion (IMD). \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eElecraft's new 2T-gen is a 2-tone test oscillator that has been designed to provide a standard 2-tone (700 and 1900 Hz) audio source for testing of SSB transceivers and linear amplifiers. This type of testing is almost universally used as a measure of transmitter linearity for amateur radio equipment. (Linearity impacts both SSB fidelity and the amount of SSB splatter that causes adjacent channel interference.) Results of 2-tone IMD tests can be found in every ARRL review of new transceivers and power amplifiers. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe 2T-gen is battery operated and provides sufficient output level (0-200 mV) to be connected directly to the microphone connector of almost any transceiver. Transmitter linearity can be determined by observing the 2-tone envelope on an oscilloscope or station monitor. For more exacting IMD measurements the output can be measured using a spectrum analyzer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFor the 2T-gen, F1 is 700 Hz and F2 is 1900 Hz, which results in a 3rd order product of 3100 Hz and a 5th order product of 4300 Hz. The amplitude of these undesired outputs is usually increased as the transmitter output is increased, and is caused by various transmitter amplifier stages beginning to operate in compression.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLike our other low-cost mini-modules, the 2T-gen is quite small: the PC board is just 2.5\"W by 3.5\"L. Rubber feet are also included so the unit can be used on the workbench.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ci\u003eNote: This product is a kit which may involve building the product by selecting individual components, soldering them to the circuit board, winding toroids, installing LEDs and displays, calibrating circuits to meet specified performance levels. \u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAF Output Level 200 mV max, adjustable, female RCA connector\u003c\/li\u003e\n\u003cli\u003eFrequency 700 Hz and 1900 Hz\u003c\/li\u003e\n\u003cli\u003eHarmonic Distortion -55 dB typical\u003c\/li\u003e\n\u003cli\u003eCurrent Drain About 3ma. from the on-board 9-V battery\u003c\/li\u003e\n\u003cli\u003eSize PC board: 3.5\"L x 2.4\"W; 1.0\"H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2T-Gen \u003ca href=\"https:\/\/www.eham.net\/reviews\/detail\/5648\" title=\"2T-Gen eHam Review\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eeHam Review\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/mini-module-test-and-pickup-manuals\" title=\"2T-Gen Manual\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e2T-Gen Manuals, Schematics, and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35210566027,"sku":"2T-GEN","price":153.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/2TGen_500.jpg?v=1519968656"},{"product_id":"at1-step-attenuator-kit","title":"AT1_AT1 41 dB Step Attenuator","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eThe Elecraft AT1 is a versatile and accurate HF\/VHF step attenuator that permits selecting any level of attenuation between 0 and 41 dB in 1 dB steps. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eThe AT1 features an unusually high upper power limit of 2 watts, making it ideal for many applications where attenuators with a lower power rating cannot be used such as at the output of a QRP transmitter for QRPp experimentation. The AT1 step attenuator is designed to be used as a standalone unit. Optionally, it may be built into existing equipment or an enclosure of your choice.\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003eNote: This product is a kit which may involve building the product by selecting individual components, soldering them to the circuit board, winding toroids, installing LEDs and displays, calibrating circuits to meet specified performance levels. \u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eRange: 0 to 41 dB in 1 dB steps\u003c\/li\u003e\n\u003cli\u003ePower Handling: 2 W (continuous)\u003c\/li\u003e\n\u003cli\u003eAccuracy: Below 50 MHz: ± 0.25+0.01(A) dB 54 to 220 MHz: ± 0.50+0.01(A) dB (Where A is the attenuation in dB.)\u003c\/li\u003e\n\u003cli\u003eDimensions: 5-3\/8” x 2-11\/16” (13.7 cm x 6.8 cm)\u003c\/li\u003e\n\u003cli\u003eNo power source required \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eAccessories\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eACCESSORIES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGo to\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/elecraft.com\/pages\/third-party-products\" target=\"_blank\"\u003e Great Products From Other Manufacturers\u003c\/a\u003e to see Accessories such as covers, cases, etc. for this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Does Elecraft sell a factory built version of the AT1?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No but we do have builders for hire.  Visit \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/elecraft.com\/pages\/get-support\" target=\"_blank\"\u003eSupport\u003c\/a\u003e for our Builders Resources page for a list of Builders for Hire.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: How easy is the AT1 to build?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  All of our Mini-Modules kits are straightforward, one night projects. The kits are easy to assemble, featuring our \"no-wires\" construction. They are also a great way to get back into the swing of building and to improve your building skills.  All of our Mini-modules have no user installed surface-mount technology, so they are an ideal project for first-time builders.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals \u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" title=\"AT1 41 dB Step Attenuator Manuals\" href=\"https:\/\/elecraftcom.myshopify.com\/pages\/mini-module-test-and-pickup-manuals\" target=\"_blank\"\u003eAT1 41 dB Step Attenuator Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35210720139,"sku":"AT1","price":98.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/AT1.jpg?v=1518139119"},{"product_id":"dl2-dummy-load-kit","title":"DL1_DL1 20W Dummy Load with RF detector","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cdiv\u003eThe Elecraft DL1 is a general-purpose wideband 50-ohm dummy load that can\u003c\/div\u003e\n\u003cdiv\u003ebe used with an Elecraft or other manufacturer’s transceiver for test purposes. The DL1 also includes a diode detector that can be used to measure power output.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe DL1 dummy load can handle a full 20 watts (continuous) and more intermittently. Its SWR is less than 1.3:1 through 225 MHz. It includes an integral RF detector for use with a voltmeter, allowing you to accurately calculate transmit power.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNote: This product is a kit which may involve building the product by selecting individual components, soldering them to the circuit board, winding toroids, installing LEDs and displays, calibrating circuits to meet specified performance levels. \u003c\/i\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003ePower Rating: 20 watts maximum; 50% duty cycle.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eBandwidth: Input VSWR less than  1.1, 0 to 30 MHz, 1.2, 0 to 144 MHz, 1.3, 0 to 225 MHz\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003ePower Measurement Accuracy: 10%, typical, 1 watt to 20 watts\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eAccessories\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eACCESSORIES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/products\/bnc-uhf-easily-adapt-your-so-239-coax-to-a-bnc-antenna-port-on-your-radio\" title=\"BNC-UHF\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e BNC-UHF\u003c\/a\u003e - adapter for PL259 cable connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/3709\" title=\"DL1 Dummy Load eHam Review\" target=\"_blank\" rel=\"noopener\"\u003eDL1 Dummy Load eHam Review\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Is the DL1 suitable to run the calibration procedures for the K3 and K3S?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  This dummy load is rated for all 3 of the Transmit Calibration Procedures called for during the building of the K3 and K3S transceivers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Is the DL1 suitable for use with the KX3 and KX2?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  This is a handy, lightweight dummy load designed for QRP radios of all kinds.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/mini-module-test-and-pickup-manuals\" title=\"DL1 20W Dummy Load\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDL1 20W Dummy Load Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35210767307,"sku":"DL1","price":41.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/DL1.jpg?v=1519702305"},{"product_id":"cp1-directional-coupler-kit","title":"CP1_CP1 Directional Coupler, 1-30 MHz","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cdiv\u003eThe CP1 Dual Directional Coupler is an easy-to-build, inexpensive, high-performance mini-module kit, ideal for first-time builders, and will serve many useful functions in your shack and at your electronics workbench. It can be built in a single evening, and includes a complete, illustrated assembly manual.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThe CP1 is a very useful tool in the ham shack, especially that of a homebrew enthusiast.  It is a dual directional coupler that provides high directivity, can be internally or externally terminated and can be constructed with a coupling loss of either 20 dB or 30 dB. It can be used to sample a transmitter's forward power and reflected power output.\u003c\/p\u003e\n\u003cp\u003eAs an example the forward power port can be connected to an oscilloscope for display of the transmit envelope. It is an ideal companion to the 2T-Gen 2 Tone test generator.\u003c\/p\u003e\n\u003cp\u003eFor more advanced applications is can be used with a spectrum analyzer and tracking generator to sweep the return loss (SWR) of an antenna or other device in real time over a frequency range.\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eNote: This product is a kit which may involve building the product by selecting individual components, soldering them to the circuit board, winding toroids, installing LEDs and displays, calibrating circuits to meet specified performance levels. \u003c\/i\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Range:  1 MHz to 30 MHz\u003c\/li\u003e\n\u003cli\u003eCoupling Loss:  20 dB or 30 dB (29.8) +\/-0.25 dB\u003c\/li\u003e\n\u003cli\u003eDirectivity:  30 dB typical\u003c\/li\u003e\n\u003cli\u003ePower Rating:  30 dB coupler, 250 watts; 20 dB coupler, 25 watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eReviews\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/5650\" title=\"CP1 eHam Review\"\u003eC\u003c\/a\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/5650\" target=\"_blank\" title=\"CP1 eHam Review\" rel=\"noopener\"\u003eP1 eHam Review\u003c\/a\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/5650\" title=\"CP1 eHam Review\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eQ: May I use the CP1 as an SWR and\/or RF power bridge?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  Yes.  The CP1 separates the power flowing in each direction on a transmission line.  By measuring the power at each connector, an accurate measurement of forward and reflected power can be made. This is very useful when matching an antenna, the input to an amplifier, or other devices. SWR bridges and power meters use a similar coupler, driving a diode detector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eQ: How do I use the CP1 with the 2 Tone Generator (2T-Gen)?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: An ordinary oscilloscope may be connected to the forward power connector and used as a monitor scope.  When used with a spectrum analyzer, the CP1 can be used at either port to observe the transmitted spectrum, including IMD if used with the Elecraft 2T-gen or other 2-tone generator. If a sweeper is substituted for the transmitter, then swept-frequency measurements can be made.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMANUALS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/mini-module-test-and-pickup-manuals\" title=\"CP1 Manual\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eCP1 Directional Coupler Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35210831883,"sku":"CP1","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/CP1iso.jpg?v=1519955423"},{"product_id":"elecraft-kx2-book-by-fred-cady","title":"E740305_Elecraft KX2 Book by Fred Cady","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis 6\" x 9\" spiral bound hard copy is designed to go on the road or to the summit with you. It fits nicely into Rose's KX2 case. It contains all KX2 information needed for portable and home base operation. This handy, portable book has a brief explanation for including the KXPA100 amplifier and the KXAT100 antenna tuner but users may want to purchase The KX2 Companion's Guide to the KXPA100 and KXAT100 for additional explanations on how the amplifier and tuner work. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003eSpiral Bound: 152 pages\u003cbr\u003ePublisher: Fredrick M. Cady\u003cbr\u003eEdition: First Edition 1.1 Standard Copyright License\u003cbr\u003eLanguage: English\u003cbr\u003eShipping Weight: 2.0 pounds\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35222326859,"sku":"E740305","price":55.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KX2FredCady1.jpg?v=1505253008"},{"product_id":"the-kx2-companions-guide-to-the-kxpa100-and-kxat100-by-cady","title":"E740306_The KX2 Companion Guide to the KXPA100 and KXAT100 by Fred Cady","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eTo add some more firepower to your 10-watt KX2, you may want to add the 100-watt KXPA100 amplifier and KXAT100 antenna tuner. This guide explains in much more detail the operation of the amplifier and tuner than The Elecraft KX2 -- Ultra-Portable, Handheld, HF Rig does. Here you will find a complete explanation of why you should run the tuner in Manual mode instead of Auto. The features of the KXPA Utility program are covered also.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003eSpiral Bound: 41 pages\u003cbr\u003ePublisher: Fredrick M. Cady\u003cbr\u003eStandard Copyright License\u003cbr\u003eLanguage: English\u003cbr\u003eShipping Weight: 0.375 pounds\u003c\/p\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cdiv class=\"panel\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35222353163,"sku":"E740306","price":38.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KX2_Companion_s_Guide_ff2ca449-0e38-4a30-a5ab-a5057b601338.JPG?v=1519172543"},{"product_id":"the-elecraft-kx-line-book-by-fred-cady","title":"E740241_The Elecraft KX-Line book by Fred Cady","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis book includes the operational details of the amazing KX3 transceiver, the KXPA100 100 watt amplifier and tuner, the PX3 panadapter and the KX3-2M\/4M VHF transverter module. These additions provide us with an all-mode, 100 watt transceiver for 160 through six meters, plus an all-mode two- or four-meter (for non-US amateurs) radio. There are schematics and diagrams for those who are visual learners, plus there are greatly expanded text explanations for those who learn best by reading. Hands-on learners will enjoy working through exercises designed to illustrate the KX3’s many features\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003eSpiral Bound: 262 pages\u003cbr\u003ePublisher: Fredrick M. Cady\u003cbr\u003eStandard Copyright License\u003cbr\u003eLanguage: English\u003cbr\u003eShipping Weight: 2.0 pounds\u003c\/p\u003e\n\u003cdiv class=\"panel\"\u003e\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35222392907,"sku":"E740241","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/The_Elecraft_KX-Line_b4fc7295-19e1-4899-a7b1-fd4f0016c815.JPG?v=1519163808"},{"product_id":"the-portable-kx3-book-by-fred-cady","title":"E740242_The Portable KX3 Book by Fred Cady","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis 6\" x 9\" spiral bound hard copy is designed to go on the road or to the summit with you. It fits nicely into Rose's KX3 case. It contains all KX3 information needed for portable operation including the KX3-2M\/4M transverter module. Changes from the first edition include updates to account for firmware changes and the addition of a chapter on the KX3-2M\/4M transverter. This handy, portable book does not include the KXPA100, KXAT100, or PX3 Panadapter. Order The Elecraft KXPA100, PX3, and 2M\/4M Transvert or The Elecraft KX-Line -- The Complete Station for your stay-at-home copy to cover the entire KX-Line. (Updated to firmware revisions: KX3 - 2.33)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003ePublisher: Fredrick M. Cady\u003cbr\u003eStandard Copyright License\u003cbr\u003eLanguage: English\u003cbr\u003eShipping Weight: 2.0 pounds\u003c\/p\u003e\n\u003cdiv class=\"panel\"\u003e\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":35222429963,"sku":"E740242","price":53.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/The_Portable_Elecraft_KX3_2d92fcf5-dc7d-4068-a0c0-b56ebea0f97a.JPG?v=1519181674"},{"product_id":"af1-audio-frequency-filter-for-qrp-radios","title":"AF1_AF1 Audio Frequency Filter","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe Elecraft AF1 is a versatile audio filter that can be used with any receiver or transceiver. It can improve intelligibility of CW, phone, or data signals, and is especially well suited to radios that have inadequate I.F. or audio filtering.\u003c\/p\u003e\n\u003cp\u003eThe AF1 uses straightforward analog circuitry and no surface-mount components, so it’s an ideal project for first-time kit builders.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA rotary switch on the unit allows you to select a low-pass characteristic with adjustable upper frequency roll-off, or a narrow bandpass characteristic.\u003c\/p\u003e\n\u003cp\u003eThe bandpass filter offers two levels of selectivity, and its center frequency may be tuned from about 350 Hz to about 950 Hz.\u003c\/p\u003e\n\u003cp\u003eThe low-pass filter is active during bandpass operation, allowing you to further control the upper frequency response.\u003c\/p\u003e\n\u003cp\u003eThe output amplifier drives low impedance phones or a small loudspeaker.\u003c\/p\u003e\n\u003cp\u003ePower can be supplied via either an on-board 9-V battery or an external supply. An LED indicates power on\/off status.\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003eNote: This product is a kit which may involve building the product by selecting individual components, soldering them to the circuit board, winding toroids, installing LEDs and displays, calibrating circuits to meet specified performance levels. \u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 5-1\/2” L x 2-7\/8” W x 7\/8” H (14 cm x 7.3 cm x 2.2 cm). Height not including feet or knobs.\u003c\/li\u003e\n\u003cli\u003eInternal Power: 9V battery\u003c\/li\u003e\n\u003cli\u003eExternal Power: 7-14 V (8 V min. recommended)\u003c\/li\u003e\n\u003cli\u003eCurrent Drain: 10 mA minimum volume to 100 mA full volume, typical.\u003c\/li\u003e\n\u003cli\u003eFunctions: Low pass plus two levels of bandpass with tunable center frequency in bandpass mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch2\u003eREVIEWS\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/9442\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eeHam Reviews of the AF1\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Is the AF1 compatible with radios other than Elecraft radios?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, the features and connections will work with most any QRP radio that needs more filtering at the audio level.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Should I consider adding an AF1 to a older, tube type radio or perhaps a simple new radio?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, the AF1 will add additional audio filtering to any radio that needs it.  It can inject new life into any older radio.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/mini-module-test-and-pickup-manuals\" title=\"AF1 Manuals\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAF1 Audio Filter Manuals, Schematics and Programmer's Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":37168239755,"sku":"AF1","price":142.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/AF1.jpg?v=1518138616"},{"product_id":"kx2gndplug-mini-banana-plug-for-portable-use-with-kx2","title":"KX2GNDPLUG_Mini Banana Plug for the KX2 and AX3","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThis mini banana plug can be added to the KX2 for safe operation in pedestrian applications.  The Ground Plug allows you to attach a trailing counterpoise wire to the KX2.  \u003c\/p\u003e\n\u003cp\u003eFor safety, if you step on the wire, the Ground Plug will be pulled out of the KX2.   In this way, the KX2 will not be suddenly pulled from the operator's hand.\u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":38316983563,"sku":"KX2GNDPLUG","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/files\/KX2gndplug.jpg?v=1743019380"},{"product_id":"kx2acbl-provides-full-integration-for-the-kxpa100","title":"KX2ACBL_KX2ACBL, KX2 Accessory Cable","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe KX2ACBL is required to connect the KX2 to an Elecraft KXPA100 Amplifier via a KXPACBL Integrated Adapter Cable. Both KX2ACBL and KXPACBL are required to connect a KX2 to a KXPA100 Amplifier.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e INTRODUCTION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eUsed to break out the computer control and \u003cem\u003ekey out \u003c\/em\u003esignals separately.  Purchase this cable if you want to have complete control of the KXPA100 and its KXPACBL cable kit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ:  I have the KXPA100 and the KXPACBL cable kit now.  Why do I need to purchase this cable?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  In order to reduce the cabinet size of the KX2 by 50% of the size of the KX3, we had to reduce the number of connectors on the left side of the KX2.  To do this, the signals found in the KX3's ACC1 and ACC2 port were consolidated into the single ACC port.  Therefore, to be able to use the KXPA100 and its standard cable set (the KXPACBL), the KX2ACBL cable was made so that you can have complete integration of the KX2 and the KXPA100.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cdiv class=\"panel\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":38318301323,"sku":"KX2ACBL","price":9.95,"currency_code":"USD","in_stock":true}]},{"product_id":"kxpacbl-provides-fully-integrated-operation-of-the-kxpa100","title":"KXPACBL_KXPACBL, KXPA100 Integrated Cable","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eProvides Amp Keying, Band Data, RF and AMP\/ATU control from the KX3 or KX2 to the KXPA100 and KXPA100 status back to KX2.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eINTRODUCTION\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003eThe KXPACBL is a set of 4 different cables designed to provide fully integrated operation of the KXPA100 with either the KX3 and KX2 (with KX2ACBL).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ:  I have the KXPA100 and the KXPACBL cable kit now.  Why do I need to purchase this cable?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  In order to reduce the cabinet size of the KX2 by 50% of the size of the KX3, we had to reduce the number of connectors on the left side of the KX2.  To do this, the signals found in the KX3's ACC1 and ACC2 port were consolidated into the single ACC port.  Therefore, to be able to use the KXPA100 and its standard cable set (the KXPACBL), the KX2ACBL cable was made so that you can have complete integration of the KX2 and the KXPA100.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":38318774987,"sku":"KXPACBL","price":76.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KXPACBL_1014_2022.jpg?v=1666240621"},{"product_id":"bnc-bp","title":"BNC-BP_BNC-BP M-Binding Posts","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe BNC-BP enables the portable operator to quickly put up a simple wire antenna.  It fits onto the BNC Antenna connector of the KX2, KX3, K2, K1 or KX1.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eAn important tool for the portable radio operator, the BNC-BP makes it simple to throw a wire into a tree, connect it to the red terminal and attach some counterpoise wires to the black terminal and you're on the air!\u003c\/p\u003e\n\u003cp\u003eSmall enough to pack away in a backpack or go-box, the BNC-BP plus some wire can make for lightweight portable activity on a moment's notice.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: How much wire will I need to make up an effective antenna for the popular ham bands such as 20M?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: You can prepare one length of 43 feet of wire for the red terminal.  Use this wire in a tree or other tall structure.  Then, connect 4 wires of about a 10 foot length to the black terminal.  These are the counterpoise wires which will be arranged around your operating position with the radio.  To store it, cut a small piece of wood in a bow-tie form and then roll the wires up onto to it.  That's all there is to it!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ:  Are there any limits for how short the wires should be and what about the gauge of wire I'd use?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  Generally, the longer the wire the better.  You can reduce the length of the radiating wire (connected to the red terminal) to about 20 to 25 feet but the ham bands below about 20 Meters will not work as well.  As for gauge, plan on using 18 or 20 gauge for the antenna.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":50776875979,"sku":"BNC-BP","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/BNC_BP.jpg?v=1531193510"},{"product_id":"bnc-ra-dress-your-antenna-wires-easily-without-disconnecting-them","title":"BNC-RA_Male-Female Right Angle BNC","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eRoute your cables flexibly with the BNC-RA.  This adapter allows the operator to position the coax cable to route to the back of the desk instead of from the right side.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003eThe BNC-RA adapter allows easy pivoting of the antenna coax for maximum ease of set up when operating portable.  It fits easily in a backpack or go-box, so purchase one for each and one for the shack.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: How does the BNC-RA pivot and what does this do for me?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  Both ends of the BNC-BP can be readjusted once the coax has been connected to them.  This means that, as you set up, you can readjust the positioning of the radio, the coax and the operating position without having to disassemble the antenna system from the radio. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ:  How much power can I use with the BNC-RA?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  We have tested it to well over 100 watts so you can use it with the KXPA100 and your KX3 or KX2 if needed.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":50779004043,"sku":"BNC-RA","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/bnc_ra_bebf5ff8-19ea-4799-a952-cc992fdfd93d.jpg?v=1523375268"},{"product_id":"bnc-uhf-easily-adapt-your-so-239-coax-to-a-bnc-antenna-port-on-your-radio","title":"BNC-UHF_BNC-UHF Adapter","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe BNC-UHF easily adapts any BNC antenna connector on the KX3 or KX2 for use with popular SO-239 connectors found on many pre-assembled coax transmission line.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe BNC-UHF adapter is a flexible adapter that supports many QRP and UHF\/VHF applications.  Easily packed into a backpack or go-bag, this adapter is an essential part of any portable operator's tool kit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: How much power can this adapter handle?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  It is rated for up to 1500 watts.  \u003c\/p\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":50780664843,"sku":"BNC-UHF","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/BNC-UHF_1d597e25-082f-4620-904d-a95f90a385dc.jpg?v=1523374326"},{"product_id":"kxfl3-dual-roofing-filter-for-the-kx3","title":"KXFL3_KX3 Dual-Passband Roofing Filter (Kit)","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eAdds high-performance, hand-trimmed roofing filters ahead of the receiver's DSP subsystem, resulting in improved close-spaced dynamic range in CW, data, and SSB modes.  \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe KXFL3 is actually 4 different filters that are shared between Phone and CW modes.  Containing 2 filters for each mode, the filters switch points are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCW Mode:  500 hz and 1500 hz\u003c\/li\u003e\n\u003cli\u003ePhone mode:  1800 hz and your choice of 2400 or 2900, menu configurable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eThis means that you get the value of 4 filters in other radios for less than the price of one in other radios!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e500 Hz\/1500 Hz matched analog filters This is equivalent to 1000\/3000 Hz in other radio IF passbands\u003c\/li\u003e\n\u003cli\u003eFully integrated into KX3 DSP engine\u003c\/li\u003e\n\u003cli\u003eAutomatically switches in the proper filter as the Pass Band Tuning (PBT) tuning control calls for it.  No need to manually switch filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eQ: May I add the KXFL3 to any KX3 at a later time?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  As with all Elecraft options, you can install any option at any time \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Are there any calibrations required if I order the KXFL3 when I order my KX3?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No.  Elecraft techs will take care of calibrating your KX3 with the KXFL3 installed as it is built for you. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Are there any calibrations required if I order the KXFL3 sometime after I take delivery of my KX3?  Do I need any test equipment for it?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  \u003cspan data-mce-fragment=\"1\"\u003eThere is a calibration procedure you'll be following when you install the KXFL3 but the test signals you'll need to conduct it are available inside the KX3. Calibration instructions can be found in the KX3 Owner's Manual and the KXFL3 Installation and Calibration Instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kx3-high-perofrmance-portable-transceiver-manuals\" title=\"KXFL3 Manuals\"\u003eKXFL3 Manuals, Schematics \u003c\/a\u003eand\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kx3-high-perofrmance-portable-transceiver-manuals\" title=\"KXFL3 Manuals\"\u003e Programmer's Reference\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":50783314699,"sku":"KXFL3","price":208.95,"currency_code":"USD","in_stock":true}]},{"product_id":"kxat3-20-watt-internal-automatic-antenna-tuner","title":"KXAT3-F_20 Watt Internal Automatic Antenna Tuner (Factory Installed)","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003e8-inductor\/8-capacitor L-network provides very wide matching range and fast tuning.\u003c\/p\u003e\n\u003cp\u003eMultiple per-band memories provide nearly instant re-tune.\u003c\/p\u003e\n\u003cp\u003eOperates even in receive, improving selectivity ahead of receiver.\u003c\/p\u003e\n\u003cp\u003eIncludes filter elements to optimize AM broadcast band receive (0.5-1.6 MHz).\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eIf you're planning to use the KX3 for portable operation, this is the essential tool you'll need to match most antenna you'll want to use.  The KXAT3 can handle up to a 10:1 SWR, which provides a far wider range of matching capabilities than most other internal automatic antenna tuners.  \u003c\/p\u003e\n\u003cp\u003eFitted inside the KX3 cabinet, all controls are available right from the KX3 Front Panel.   \u003c\/p\u003e\n\u003cp\u003eEasily added to any KX3 at any time.   The installation instructions are found in the KXAT3 manual.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMatching range:  Up to 10:1 SWR\u003c\/li\u003e\n\u003cli\u003eMaximum power handling:  20 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cspan style=\"font-size: 22.5px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/span\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eQ: If I am going to use the KX3 with the KXPA100, do I need to install the KXAT3 inside the KX3?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The KX3's internal antenna tuner, KXAT3, is rated at 20 watts and fits inside the KX3 cabinet.  \u003c\/p\u003e\n\u003cp\u003eWhen the KXPA100 is added, however, you'll need to include the KXAT100, the 100 Watt tuner that is fully integrated into the amplifier.  \u003c\/p\u003e\n\u003cp\u003eThis arrangement allows you to have the KXAT3 available when you 'grab-and-go\" with the KX3 but then have the 100 Watt tuner inside the KXPA100 when you return to the shack and reconnect the KX3 for full 'barefoot' operation at 100 Watts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Is there a way to erase pre-stored tuning memories if I change antennas on the KX3?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  You can erase memories on a per-band basis.  That is, if you change antennas or readjust the same antenna, you can fully erase all memories on any one band so the automatic tuner can be 'retrained' for the new antenna or settings.  \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kx3-high-perofrmance-portable-transceiver-manuals\" target=\"_blank\" title=\"KXAT3 Internal Automatic Antenna Tuner Manual\" rel=\"noopener noreferrer\"\u003eKXAT3 Manuals, Schematics and Programmer's Referencel\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":50784584971,"sku":"KXAT3-F","price":324.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/Kxat3_da3c9301-de6b-48ed-b119-10bc7cfc66a6.jpg?v=1659029798"},{"product_id":"kxbc3-internal-nimh-charger-real-time-clock","title":"KXBC3_Internal NiMH Charger \/ Real-Time Clock (Kit)","description":"\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eSafely and automatically charges 8 NiMH cells in the KX3's internal 8-AA battery pack from an external 13.8V supply. \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eCharge time varies depending on cell capacity and depth of discharge; 8 hours typical. Includes real-time clock, providing time display and alarm.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Charging Voltage: 13.8v\u003c\/li\u003e\n\u003cli\u003eCharging Current: 200 mA\u003c\/li\u003e\n\u003cli\u003eCharge time is set in KX3 Menu\u003c\/li\u003e\n\u003cli\u003eThermal and Voltage overload protection build into the charge controller\u003c\/li\u003e\n\u003cli\u003eSupports NiMH batteries only\u003c\/li\u003e\n\u003cli\u003eReal Time Clock can be set with the KX3 Utility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eQ: Does the KXBC3 support other types of batteries such as LiPO or LiFE?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The KXBC3 is designed to charge Nickel Metal Hydride (NiMH) battery types only.  It will not charge other types of batteries.  While the other types of batteries can be used with the KX3, they will need to be recharged in an external battery charger that supports those formulations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: What is the Real Time Clock, where is it found on the KX3 display and how is it powered to keep time?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: The Read Time Clock replaces the Elapsed Time clock when observed with the DISP button.  When installed, the Real Time Clock uses the internal NiMH batteries to keep it powered up.   The Real Time Clock will keep running for about 20 minutes if you need to replace the NiMH batteries in the KX3, too.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Do I need to have the KXBC3 installed whenever I use my NiMH batteries?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No. You can operate the KX3 without any batteries installed inside the radio.  If you choose to add NiMH batteries, they will operate.   The difference comes when you find the need to remove the NiMH batteries for recharging. With the KXBC3, you can leave the batteries installed in the KX3 and recharge them from an external power supply.  Otherwise, you can remove the NiMH batteries and recharge them in an external charger.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ: Does the KXBC3 come with its own external power supply that I plug into the wall? and how is it powered to keep time? \u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: No. The KX3 and the KXBC3 will handle the recharging using a typical 13.6 volt external power supply found in most ham radio shacks.  That power supply can run both the KXBC3 and the KX3 at the same time, if needed.  That is, you can operate the KXBC3 to recharge the batteries installed inside the KX3 while carrying on QSO's at the same time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ftp.elecraft.com\/KX3\/Manuals%20Downloads\/E740167%20Elecraft%20KXBC3%20Installation%20and%20Operation%20Rev%20B1.pdf\" target=\"_blank\"\u003eKXBC3 Owners and Installation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":50788309515,"sku":"KXBC3","price":153.95,"currency_code":"USD","in_stock":true}]},{"product_id":"kxat100-automatic-antenna-tuner-atu","title":"KXAT100-F_KXAT100 Internal 100W ATU (Factory Installed)","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cdiv\u003eThe KXAT100 is an add-on option for the KXPA100 that fits inside the KXPA100 cabinet.  It also provides full integration with the KX3 or KX2.  It also adds a 2nd Antenna Port to the KXPA100.  \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eTheKXAT100 adds a 100 Watt, fully automatic antenna tuner to the KXPA100.  Not requiring an additional cabinet, the KXAT100 fits inside the KXPA100's cabinet and becomes fully integrated with the KXPA100 once it has been installed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSPECS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutotune Power 1.5 Watts, minimum.\u003c\/li\u003e\n\u003cli\u003eThe KXPA100 amplifier is bypassed during a tuning operation so only the drive power from the transceiver is used for tuning.\u003c\/li\u003e\n\u003cli\u003eTypical Matching Range\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSWR as high as 10:1 at 100 watts\u003c\/li\u003e\n\u003cli\u003eSWR as high as 20:1 at 10 watts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUses Elecraft's fast matching algorithm\u003c\/li\u003e\n\u003cli\u003eKXAT100 ATU settings saved per band, per band segment, and per antenna for instant recall\u003c\/li\u003e\n\u003cli\u003eAdds a 2nd ANT port to the KXPA100, selectable from the KXPA100 front panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: Can I add the KXAT100 to a KXPA100 at a later time?\u003c\/h3\u003e\n\u003cp\u003eA:  Yes.  As with all options for Elecraft products, you can add any option, at any time and in any order or installation.\u003c\/p\u003e\n\u003cdiv class=\"panel\"\u003e\u003c\/div\u003e\n\u003ch3\u003eQ: When I connect a KX2 or KX3 to the KXPA100, does it control the KXAT100, too? \u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes.  The KXAT100, once installed, will come under the control of a KX3 that is attached to the KXPA100 via the KXPACBL cable kit.  This means that the ATU TUNE function on the KX3 can be used with the KXAT100 ATU for fully automatic operation. \u003c\/p\u003e\n\u003ch3\u003eQ: How to I control the KXAT100 when I am using the KXPA100 with a different radio than the KX3 or KX2?\u003c\/h3\u003e\n\u003cp\u003eA:  The KXAT100 provides a complete set of controls on the front of the KXPA100 when it is installed.  This includes Antenna port, Bypass\/Manual\/Automatic Mode selector, and SWR lights.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eReviews\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREVIEWS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.eham.net\/reviews\/detail\/11411\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eeHam Review of the KXPA100\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eManuals \u0026amp; Downloads\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/elecraftcom.myshopify.com\/pages\/kxpa100-100-watt-linear-amplifier-manuals\" target=\"_blank\" title=\"KXPA100 Manuals, Schematics and Programmer's Reference\" rel=\"noopener noreferrer\"\u003eKXPA100 Accessories Manuals\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":50879832523,"sku":"KXAT100-F","price":505.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/KXAP100_3e5f9394-89b8-4f87-a3e0-14ff88a5c6ba.JPG?v=1536013594"},{"product_id":"kpa500-kat500-book-from-fred-cady","title":"E740244_KPA500\/KAT500 book from Fred Cady","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOVERVIEW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eLike the K3 and KX3 books, you will find many diagrams, schematics, and visual aids for understanding the K3s, KPA500 and KAT500 K-Line. You'll find text expanding on what Elecraft has put into the K3, KPA500, and KAT500 Owner's Manuals for those of you who like to learn by reading, and you will find in each section exercises to help you verify your understanding by experimentation. KX3 and non-Elecraft transceiver owners will find useful information to allow them to use the KPA500 and KAT500 also.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis edition has been formatted for electronic publication and reading. No part of this book may be reproduced, stored in a retrieval system, or transmitted by any means without the written permission of the author. Purchasers may make physical and backup copies for their own use but may not distribute it in any way.\u003c\/em\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003eSpiral Bound: 129 pages\u003cbr\u003ePublisher: Fredrick M. Cady\u003cbr\u003eStandard Copyright License\u003cbr\u003eLanguage: English\u003cbr\u003eShipping Weight: 2.0 pounds\u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":50990413067,"sku":"E740244","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/k-line_2nd.jpg?v=1519173546"},{"product_id":"sma-ra-right-angle-adapter-sma-with-male-and-female-connectors","title":"SMA-RA_Right Angle Adapter W\/ Male- Female Adapter","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe SMA-RA is a small adapter that turns 90 degrees which allows a transmission coax cable to be dressed away from the operating position.  \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eAdditionally, the SMA-RA can be used with the SRH77CA* flexible antenna to operate the KX3's 2 Meter band while the KX3 is sitting on a desk or other flat surface.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*Note: This product is no longer available (at Elecraft). Visit our Retired Products page to view the list.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eQ: Does the SMA-RA lock into position so that the SRH77CA can stand up while my KX3 is sitting in my shack?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA: Yes, it will.  You can secure it so that the antenna is supported by the SMA connector on the KX3.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Note: This product is no longer available (at Elecraft). Visit our Retired Products page to view the list.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":51785002635,"sku":"SMA-RA","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/SMA_RA_MF_6c4847fd-145d-46e6-93ea-4bd900f8a89d.jpg?v=1640724135"},{"product_id":"sma-bnc-male-female-coax-adapter","title":"SMA-BNC_Male\/Female Adapter","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003eThe SMA-BNC adapter allows BNC-terminated cables to be used with the KX3's 2 Meter Option.\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eA versatile addition to anyone's go-bag or adapter kit, the SMA-BNC can be combined with the SMA-RA and the BNC-MM (dual Male adapter) to accommodate many types of 50 ohm coaxial connections.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003eQ:  Can I use the BNC-SMA and connect it to the SMA-RA so that the BNC coax can be routed off the back of the operating desk?\u003c\/p\u003e\n\u003cp\u003eA:  Yes.  The SMA-RA will attach directly to the SMA end of the SMA-BNC so that this can be made to work.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":51785622859,"sku":"SMA-BNC","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/SMA-BNC.jpg?v=1504739528"},{"product_id":"kx3-pckt-accessory-cable-kit","title":"KX3-PCKT_Accessory Cable Kit for KX3","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cdiv\u003eThe KX3-PCKT cable set interfaces between the Elecraft KX3 and personal computers, and provides convenient connection to an external foot switch and RF power amplifier.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003eThis cable set consists of four components:\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eTransmit Audio:  3.5mm stereo right-angle to straight through cable (green band)\u003c\/li\u003e\n\u003cli\u003eReceive Audio:   3.5mm stereo right-angle to straight through cable (red band)\u003c\/li\u003e\n\u003cli\u003eRX I\/Q cable:      2.5mm right-angle to 3.5mm cable\u003c\/li\u003e\n\u003cli\u003eACC2 Module:    2.5mm stereo right-angle to KEY OUT and PTT IN (or Transmit Inhibit, or AuxBus) molded module. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch3\u003eQ: I would like to run my KX3 for digital operation with my computer.  Is this the cable set I need to purchase?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  Yes.  You can purchase just the Receive and Transmit cables separately or you can purchase the whole cable set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ:  I want to use some of the new SDR computer programs such as HD-SDR and CW Skimmer.  What cable do I need for those applications?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  The RX I\/Q cable adapts the RX I\/Q port to a standard 3.5mm plug so that you can use the soundcard in your computer to process the signals needed for any of the new SDR programs.  You can purchase just the individual cable or the entire KX3-PXKT to obtain it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eQ:  I would like to connect my KX3 directly to a higher power linear amplifier.  What cable do I need?\u003c\/h3\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cp\u003eA:  The ACC2 Module cable exposes the KEY OUT signal that is needed to enable a linear amplifier to go into transmit when the KX3 does.  The RCA jack you see on the module is the KEY OUT signal formatted into an RCA jack that is commonly used with my popular linear amplifiers, including those from Elecraft.  \u003c\/p\u003e\n\u003cp\u003eYou can purchase it separately or as part of the KX3-PCKT cable kit.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":51982230091,"sku":"KX3-PCKT","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/kx3-pckt_cables.png?v=1504895585"},{"product_id":"e850775-extra-kx3-power-cable-with-right-angle-connector","title":"E850775_KX3 Power Cable, Right Angle","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThis power cable is the same one that is shipped with any KX3, KX2 or W2. \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMany portable operators will purchase extra cables to make it easy to connect batteries, power supplies or adapters for mobile operation to those products.  \u003c\/p\u003e\n\u003cp\u003eThe cable has a 5.5mm outside diameter, 2.1mm inside diameter plug with a right-angle connection on one end and tinned wires on the other for easy connection to your power supply or battery.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eQ:  Why might I need more than one power cable for my KX3 or KX2?\u003c\/h3\u003e\n\u003cp\u003eA:  Many operators tell us that they will use different power sources depending on how they're using the radio.  For that reason, attaching cables to those devices means you do not have to take the time and effort to move the power cable itself from device to device.\u003c\/p\u003e\n\u003ch3\u003eQ:  How much current will the E850775 cable handle?\u003c\/h3\u003e\n\u003cp\u003eA:  It is rated to handle about 3.0 amps at 13.6 volts.  This is sufficient to handle the full 15 watts output of the KX3 or 10 watts output for the KX2.\u003c\/p\u003e\n\u003ch3\u003eQ:  I use Anderson Power Pole connections in all my gear.  Do you have a cable like this with the APP connectors installed?\u003c\/h3\u003e\n\u003cp\u003eA:  Yes, we do.  Please order E980262, which is this same cable but with the APP connector already installed on it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":51983760651,"sku":"E850775","price":10.95,"currency_code":"USD","in_stock":true}]},{"product_id":"kxser-exchange","title":"KXSER SWAP_ No charge for exchanging KXUSB for a KXSER","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eAt order time, a KXSER cable can be substituted for the KXUSB.   The KXSER cable is designed to connect to a 9-pin COM port on a computer.  \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMost newer computers and laptops do not have 9-pin COM ports so the KXUSB cable is shipped instead.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eQ:  I have an Apple computer and a Linux computer.  Do I need to order the KXSER instead of the KXUSB?\u003c\/h3\u003e\n\u003cp\u003eA:  No.  If you have a USB port on your computers, we recommend the KXUSB cable that ships automatically with the KX3 or KX2.\u003c\/p\u003e\n\u003ch3\u003eQ:  I have an older laptop that still has a 9-pin COM port on it but it also has USB ports available.  Which cable should I use?\u003c\/h3\u003e\n\u003cp\u003eA:  Where possible, we always recommend the KXUSB cable.  This cable provides the flexibility to connect to most any newer computer available today.\u003c\/p\u003e\n\u003ch3\u003eQ: I ordered the KXSER cable when I ordered my KX3 and KX2.  I have now changed computers which only has USB ports.  What should I do?\u003c\/h3\u003e\n\u003cp\u003eA:  You can order the KXUSB cable separately as Elecraft product KXUSBa. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":51985942667,"sku":"KXSER_SWAP","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2029\/4979\/products\/Kxser.jpg?v=1659221604"},{"product_id":"kxsera-additional-rs232-communication-cable-with-9-pin-connector","title":"KXSER-a_KXSER-a Additional RS232 communication cable with 9-pin connector","description":"\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eThe KXSERa product is a communication cable to connect many Elecraft products to the common RS232 COM port with a 9-pin connector.  The 'a' version can be purchased separately.  \u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eAt order time, a KXSERa cable can be substituted for the KXUSB, which is shipped with all KX3, KX2, and KAT500 products.   The KXSER cable is designed to connect to a 9-pin COM port on a computer.  \u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eQ:  I have an Apple computer and a Linux computer.  Do I need to order the KXSERa instead of the KXUSB?\u003c\/h3\u003e\n\u003cp\u003eA:  No.  If you have a USB port on your computers, we recommend the KXUSB cable that ships automatically with the KX3 or KX2.\u003c\/p\u003e\n\u003ch3\u003eQ:  I have an older laptop that still has a 9-pin COM port on it but it also has USB ports available.  Which cable should I use?\u003c\/h3\u003e\n\u003cp\u003eA:  Where possible, we always recommend the KXUSB cable.  This cable provides the flexibility to connect to most any newer computer available today.\u003c\/p\u003e\n\u003ch3\u003eQ: I ordered the KXSERa cable when I ordered my KX3 and KX2.  I have now changed computers which only has USB ports.  What should I do?\u003c\/h3\u003e\n\u003cp\u003eA:  You can order the KXUSB cable separately as Elecraft product KXUSBa. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"elecraftcom","offers":[{"title":"Default Title","offer_id":51988993163,"sku":"KXSER-a","price":43.95,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/elecraft.com\/collections\/collection-test.oembed?page=2","provider":"Elecraft","version":"1.0","type":"link"}